Loading ...
04/21/17 www.elitescreens.com
2
Note: Additional spare parts may be included.
Assembly
Step 1. Place a soft-clean cloth on the ground or other flat surface of the area where the screen will be assembled.
Step 2. Position the pieces of the frame face-down on the soft-clean cloth in the arrangement shown below.
Step 3. Both Horizontal Frame parts should each have the Center Joint (A) already secured on one side with two Large Hex
Screws
(D). Insert the Center Joint (A) connectors into the other half of the horizontal frame and fasten with two Large Hex
Screws
(D).
Step 4. Insert the Elbow Joints (C) to top and bottom sections of the vertical frame. Once inserted, secure the Elbow Joints
(C) by fastening them with the Small Hex Screws (D) and connect the vertical sections to the horizontal frame sections.
Make sure all corner frames pieces are flush (no gaps). They should form perfect right angles.
Do no tighten completely until all frame pieces are assembled correctly.
Item Parts List
100”
Screen
120”
Screen
135”
Screen
A. Center Joints 2 2 2
B.
Springs
38
44
50
C.
Elbow Joints 8 8 8
D.
Large Hex Screw/Small Hex Screw 4/32 4/32 4/32
E. Pull Hook 1 1 1
F. Wall Bracket 2 2 2
G.
Allen Key
2 2 2
H.
Wood Screws/Anchors
4/4
4/4
4/4
I.
Tension Rods
6 6 6
J.
Center Support Bar
1 1 1
Note: You may have to loosen and adjust the brackets and frame pieces. It will help to leave the screws loose
until perfect right angles are formed, then tighten the screws securely.
Loading ...
Loading ...
Loading ...