Loading ...
Loading ...
Loading ...
8 EN
• Connect the AC power cord to
• the DC-IN socket on the back of the
main speaker.
• the wall power socket.
Turn DS6800W on
1 Press to turn the unit on.
2 Wait for successful boot-up of the unit.
» The boot-up takes about 35 seconds.
» During boot-up, the Wi-Fi SETUP
indicator on the back of the main
speaker blinks green quickly.
» After boot-up, if no Wi-Fi connection
has been set up for DS6800W, the
Wi-Fi SETUP indicator starts to blink
green slowly.
• To turn the unit off, press
again.
Prepare the remote control
Caution
•
Risk of explosion! Keep batteries away from heat,
sunshine or re. Never discard batteries in re.
• Perchlorate Material - special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
For rst-time use:
1 Remove the protective tab to activate the
remote control battery.
To replace the remote control battery:
1 Open the battery compartment.
2 Insert one CR2032 battery with correct
polarity (+/-) as indicated.
3 Close the battery compartment.
Note
•
Before pressing any function button on the remote
control, rst select the correct source with the remote
control instead of the main unit.
• If you are not going to use the remote control for a
long time, remove the battery.
DS6800W_37_UM_Book.indb 8 2011-9-14 10:53:27
Loading ...
Loading ...
Loading ...