Loading ...
Loading ...
Loading ...
Maintenance
107
Normal Maintenance Schedule - Turbo Models
The following maintenance services must be performed to ensure good emission control and performance.
Keep receipts for all vehicle emission services to protect your warranty.Where both mileage and time are shown, the
frequency of service is determined by whichever occurs first.
Number of months or driving distance, whichever comes first
Months 12 24 36 48 60 72 84 96 108 120 132 144 156 168 180
Miles×1,000 6 12 18 24 30 36 42 48 54 60 66 72 78 84 90
Km×1,000 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Drive belts *
1
At first, inspect at 100,000 km (60,000 miles) or 72 months,
after that, inspect every 20,000 km (12,000 miles) or 24 months
Engine oil and engine oil
filter
Theta II 2.0L T-GDI R R R R R R R R R R R R R R R
Fuel additives *
2
Add every 10,000 km (6,000 miles) or 12 months
Air cleaner filter - I - R - I - R - I - R - I -
Spark plugs Theta II 2.0L T-GDI Replace every 72,000 km (45,000 miles) or 36 months
Valve clearance *
3
Theta II 2.0L T-GDI Inspect every 100,000 km (60,000 miles) or 72 months
I : Inspect and if necessary, adjust, correct, clean or replace.
R : Replace or change.
*
1
:The drive belt should be replaced when cracks occur or tension is reduced.
*
2
: If TOP TIER Detergent Gasoline is not available, one bottle of additive is recommended. Additives are available from your
authorized Kia dealer along with information on how to use them. Do not mix other additives.
*
3
: Inspect for excessive valve noise and/or engine vibration and adjust if necessary. Have an authorized Kia dealer perform the
operation.
MAINTENANCE
INTERVALS
MAINTENANCE
ITEM
Loading ...
Loading ...
Loading ...