Loading ...
Loading ...
21-5/16"
(54.1 cm)
depth
30" (76.2 cm) or
36" (91.4 cm) width
3/4" (1.9 cm)
both sides
2-7/8" (7.3 cm)
burner box
height
3
Product
dimensions
Junction box, or
outlet –
12" (30.5 cm) min.
from bottom of countertop.
10" (25.4 cm) from right side
of cabinet.
18" (45.7 cm) min.
clearance upper
cabinet to countertop
within minimum
clearances to cooktop
Do not seal
cooktop to
countertop.
back edge
of cutout
rear of cabinet or
rear wall under
countertop
KECC051
series only
11/16"
(1.7 cm)
min.
2" min.
(5.1 cm)
13" (33 cm)
recommended
upper cabinet
depth
1" (2.5 cm) min. distance to
nearest left and right side
combustible surface above
cooktop.
See NOTE*
for minimum
clearances.
combustible area
above
countertop
*
Note: 24" (61 cm) min. clearance if bottom
of wood or metal cabinet is protected by
not less than 1/4" (0.6 cm) flame retardant
millboard covered with not less than No.
28 MSG sheet steel, 0.015" (0.04 cm)
stainless steel, or 0.024"(0.06 cm)
aluminum or 0.020" (0.05 cm) copper.
30" (76.2 cm) min. clearance between top
of cooking platform and bottom of
unprotected wood or metal cabinet.
15" 14-1/2" 15" 1-1/2" max
(38.1 cm) (36.6 cm) (38.1 cm) (3.8 cm)
30" 29-1/2" 30"
(76.2 cm) (75 cm) (76.2 cm)
—
36" 35-1/2" 36"
(91.4 cm) (90.2 cm) (91.4 cm)
—
Cooktop width
Illustration dimensions
Cutout dimensions/requirements
2-7/8" (7.3 cm)
burner box
height
21" (53.3 cm)
depth
15"
(38.1 cm)
2-7/8" (7.3 cm)
burner box height
3/4" (1.9 cm)
both sides
21-5/16"
(54.1 cm)
depth
30" (76.2 cm) or
36" (91.4 cm) width
20-1/2"
(52 cm)
Note: If cabinet has a drawer, a 3" (7.5 cm) depth clearance from the
countertop to the top of the drawer (or other obstruction) in base
cabinet is required.
Important note on base cabinet construction: After making the
countertop cutout, some installations may require notching down the
base cabinet side walls to clear the burner box.To avoid this
modification, use a base cabinet having sidewalls wider than the cutout.
YK20658/8285316 ENG 8/23/02 12:07 PM Page 3
Loading ...
Loading ...
Loading ...