Loading ...
Loading ...
Loading ...
9
When in troubleBefore Use Operation Cleaning
Child safety lock
Locks the control panel to prevent accidental button operations by children.
Setting the child safety lock
1
Press for about 3 seconds. (Until the buzzer sounds twice.)
lights up.
To cancel
1
Press for about 3 seconds. (Until the buzzer sounds twice.)
.
Even if the child safety lock is set, the compartment selection can be operated.
Reset the Settings
Returns the compartment selection, temperature control, ECO MODE, rapid cooling settings and temperature
fine adjustment mode to their initial condition (at the time of purchase). Use for example if you have
forgotten the settings.
Resetting
1
Press and at the simultaneously for about 3 seconds. (Until the buzzer sounds twice.)
The refrigerator is in the demonstration operation when the entire
display blinks 3 times in regular intervals, or the compartment display
and temperature control display blinks repeatedly in order.
The refrigerator does not cool in this mode.
Cancel the demonstration operation.
Page 16
If the control panel display blinks
The door alarm beep varies depending on how long the door
has been opened. See below for details.
The door alarm beeps when the refrigerator or freezer compartment
door is opened for more than 1 minute.
The compartment displays on the control panel blink in time
with the door alarm sounding.
Check for an ajar door or trapped food (Door packing, rear side of the drawer cases).
(Check at least once a month.)
If the alarm keeps sounding even after closing the doors, contact
the retail store where you purchased the refrigerator or MITSUBISHI
ELECTRIC SERVICE CENTRE.
About the door alarm
Door open time
1 minute 2 minutes 3 minutes 4 minutes
5 minutes or longer
Alarm
2 beeps 3 beeps 4 beeps
Continuous long
beeps
Continuous short
beeps
Loading ...
Loading ...
Loading ...