Loading ...
Loading ...
Loading ...
14
When in troubleBefore Use Operation Cleaning
How to cleanBefore cleaning
Step
2
Step
1
Remove the power plug
Wait at least 10 minutes before reinserting the power plug
into the socket.
If you insert the plug immediately, the mechanism will not
function.
Wipe with a soft cloth soaked in lukewarm water, or remove the parts and
(Wipe the control panel with a soft, dry cloth.)
For stubborn dirt, wipe using water mixed with a weak concentration of kitchen
only). In particular, be sure to wipe off oily dirt because leaving it may damage
Do not use following alkaline or low alkaline kitchen detergents,
alcohol, benzene, thinner, oil, acid, scrubbers, boiling water, or
Doing so may cause the plastic parts (such as the door
or damage or rust the doors or painted surfaces.
Failure to unplug
may result in an
electric shock.
Warning
How to remove the upper shelf
Lift the upper shelf with
both hands to take it out.
How to remove the middle and
lower shelves
Remove the middle and lower shelves
with both hands.
Reverse the steps to put
back the shelves.
fall off.
Tempered glass shelves
Open the door.
Slide out the ice tray and remove.
Draw the ice storage
case towards you
and remove.
Ice tray /
Ice storage box
Pull the case towards you. Hold
the end on your side and lift the
case.
Cases in the Freezer
compartment
Removing and Cleaning
the Parts
Illustration of the MR-L710EH
Loading ...
Loading ...
Loading ...