5-STAR ADJUSTABLE FEATURES BENEFITS
5-STAR WEDGE FEATURES
- Thin bottom blade bevel with deeper teeth
- Square, atter angle top blade teeth
- Longer teeth allow for an additional .02 cut length
- Flat bottom blade allows closer cutting
- Deeper bottom blade teeth allow for a longer feed
- Top cutting blade creates a “crunching” sound
- Eliminates the need for a 1½ attachment comb or a 1.5 blade
- Creates a blunt cut look
- Ideal for soft line fading and seamless blends
BENEFITS
5-STAR STAGGER TOOTH FEATURES
- Thin bottom blade 13˚ bevel with deeper teeth
- Staggered top blade, alternates with long and short
blade teeth
- Blade set can be adjusted to a zero-overlap
- Flat bottom blade allows closer cutting
- Staggered top blade allows for two dierent cutting paths
- Staggered top blade creates texture while cutting
- Creates seamless blends when hard or soft line fading
- Ideal for bulk hair removal
BENEFITS
WAHL CLIPPER CLIPPER GUIDE
FEATURES AND BENEFITS
2-HOLE STANDARD FEATURES
- Bottom blade 21˚ bevel has a backstripe
(ridges)
- Longer blade teeth
- Allow a 1mm-3mm cut length
- Easy to pick up and feed hair
- Glides through longer hair
-O scalp cutting techniques
BENEFITS3-HOLE STANDARD
5-STAR BALDING 6X0 FEATURES
- Thin bottom blade 13˚ bevel with no backstripe
(ridges)
- Extremely thin, short blade teeth
- Flat bottom blade allows closer cutting
- Ultra close full size trimming blade
- Ideal for outlining
- Full head Balding
BENEFITS
- Thin bottom blade 13˚ bevel with deeper teeth
- Blade set can be adjusted to a zero-overlap
- Flat bottom blade allows closer cutting
- Precision Fades
- On scalp tapering and fading techniques
DETACHABLE BLADES
- Snaps on and o
- Consistent cutting length
- Ideal for ambidextrous users
SPECIALTY SNAP-ON BLADES
- Fine (Trimming) Blade
- Texturizing Blade
- Razor Blade
- Beta (Chunking) Blade
SNAP-ON STANDARD FEATURES
SPECIALTY SNAP-ON
BLADES
- Snaps on and o
- Taper lever located at the bottom of the blade
- Ideal for ambidextrous users
FOR TEXTURE, CHUNKING & RAZOR
Position 1 - light texturing, bulk removal
Position 3 - aggressive texture, chunking
Position 5 - razor, soft edges, layering
ADJUSTABLE ALL-IN-ONE FEATURES BENEFITS
DETACHABLE BLADES
- Snaps on and o
- Taper lever located at the bottom of the blade
- Ideal for ambidextrous users
DETACHABLE BLADES
ADJUSTABLE 5-in-1
5-LEVEL CUTTING LENGTH ADJUSTMENT
(0,7MM - 3MM)
FEATURES BENEFITS
For proper blade alignment and blade replacement procedures go to www.wahlpro.com
to view our Vibrator Clipper Maintenance Guide.
When aligning the blades, it is important that the movable top blade
DOES NOT EXTEND OVER THE STATIONARY BOTTOM BLADE.
If the top blade overlap occurs, there is a potential to cause skin abrasions.
CORRECT INCORRECT
The movable top blade should not extend past the stationary bottom blade
BLADE ALIGNMENT BLADE ADJUSTMENT LEVER
The blade adjustment lever regulates the cut length.
This lever allows for easy tapering, fading, and blending
CLOSED
shortest cutting length
OPEN
longest cutting length
WAHL MAINTENANCE GUIDELINES
STEP 1. CLEAN
USE CLIPPER BRUSH TO RID BLADES
OF DEBRIS
STEP 2. SANITIZE
SPRAY BLADES WITH HOSPITAL GRADE
DISINFECTANT*
STEP 3. OIL
OIL CLIPPER USING 5-POINT
OILING SYSTEM
STEP 4. STORE
STORE CLIPPER USING HANG HOOK IF PROVIDED
AND COVER BLADES WITH RED BLADE GUARD
DO NOT WRAP CORD AROUND CLIPPER
* Failure to properly disinfect your clipper can result in cross contamination and infections.
MOTOR INFORMATION
Standard motor: an electro-magnetic motor (arm and
coil), ecient power that is standard on basic clippers.
V5000 motor: a strong electro-magnetic motor (arm and
coil), more power than the standard motor.
V9000 motor: a strong electro-magnetic motor (arm and
coil) slightly stronger than the V5000, cooler running and
energy ecient.
Rotary motor: a sealed motor with brushes. Has
comparable power range to a V5000 and V9000
electro-magnetic motor.
*On select corded and cordless clippers.