WF393BT User Manual

Loading ...

32_ maintaining your washer

PURE CYCLE™

Pure Cycle is a self-cleaning cycle that removes mold that may occur inside the washing machine.

1. Press the Power button.

2. Press the Pure Cycle™ button.

• OncethePureCyclebuttonispressed,theonly

function that can be set is Delay Start.

3. Press the Start/Pause button.

• WhenyoupresstheStart/Pausebutton,PureCycle

begins.

• Using Pure Cycle, you can clean the drum without using a cleansing agent.

• Never use Pure Cycle when laundry is in the washing machine. It may cause damage to the

laundry or a problem with the washing machine.

• Ifyouwanttouseadrumcleansingagent,useonly1/10oftheamountofthedrum

cleansing agent recommended by the cleansing agent manufacturer. (When using a

powder-type cleansing agent , remove the liquid detergent compartment.)

The Pure Cycle Auto Indicator Function

• Ifthe“Pure Cycle” button is lit after a wash, it indicates

that tub (drum) cleaning is required. In this case, remove

the laundry from the washing machine, turn the power on,

and clean the drum by running Pure Cycle.

• IfyoudonotrunPureCycle,the“Pure Cycle” indicator

turns o. However, the “Pure Cycle” indicator will light

again after two washes. Not running Pure Cycle at this

point will not cause a problem with the washing machine.

• AlthoughthePureCycleAutoIndicatorappearsoncea

month or so, the frequency may dier depending on the

number of times the washing machine is used.

maintaining your washer

CAUTION

WF395BTPA-03145B-06_EN.indd 32 2014-2-24 11:52:46

Loading ...

User Manual - Page 32