Loading ...
Loading ...
Loading ...
1
(A)(A)
2
(A)
(A)
+1/2”
+1/2”
(1.3 cm)
(1.3
cm)
(A)
+1/2”
(1.3 cm)
3
-5/8”
3-5/8
”
(9.2 cm)
(9.2
cm)
3
-5/8”
(9.2 cm)
Measure from floor to bottom
of the anit-tip opening located on the back of
range. This will be measurement (A).
Locate anti-tip bracket on rear wall with the top left
corner at measurement (A) plus 1/2” (1.3 cm) from the
floor and 3-5/8” (9.2 cm) from where the right side of
range (facing range) is to be located.
3
Mark and drill holes where bracket
will be located.
7
Set the high corner of range so that the top
of side trim is 3/8” (0.95 cm) above
countertop. Level range to high corner.
Anti-tip Device Installation - Wall Mount
14
WARNING
Tipping hazard.
To reduce the risk of the
appliance tipping, it must be
secured by a properly installed
anti-tip bracket(s). To make sure the bracket has
been installed properly, look behind the range with a
flashlight to verify proper installation.
• This range can tip.
• Injuries to persons can result.
• Install anti-tip device packed with range.
• See installation instructions.
Leveling/Adjustments/Alignment
1
2
4
Attach bracket with
mounting hardware provided.
Loading ...
Loading ...
Loading ...