Loading ...
Loading ...
Loading ...
Changing a Flat Tire
If you have a flat tire while driving,
stop in a safe place to change it.
Stopping in traffic or on the shoulder
of a busy road is dangerous. Drive
slowly along the shoulder until you
get to an exit or an area to stop that
is far away from the traffic lanes.
1. Park the car on firm, level and
non-slippery ground away from
traffic. Put the transmission in
Park (automatic) or Reverse
(manual). Apply the parking brake.
2. Turn on the hazard warning lights
and turn the ignition switch to
LOCK (0). Have all the
passengers get out of the car while
you change the tire.
3. Open the trunk. Raise the trunk
floor by lifting up on the back edge.
4. The tools are in the tool box on
the right side of the trunk. Take
the tools out of the tool box.
5. Unscrew the wing bolt and take
the spare tire out of its well.
6. The jack is behind a cover in the
right fender. Remove the cover by
turning the handle counterclock-
wise, then pulling on the cover.
CONTINUED
Taking Care of the Unexpected
The car can easily roil off the
jack, seriously injuring anyone
underneath.
Follow the directions for
changing a tire exactly, and
never get under the car when it
is supported only by the jack.
TRUNK FLOOR
SPARE TIRE JACK
TOOL KIT
COVER
０３／０７／１０ １６：１１：０９ ３１Ｓ５Ａ９３０ ００２１
０３／０７／１０ １６：１１：０９ ３１Ｓ５Ａ９３０ ００２１
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...