Loading ...
Loading ...
Loading ...
5
PRE-RIDE CHECKLIST
How to Ride
Place one foot on the baseboard, push forward with the other foot. Steer with both hands on the handlebars.
For enhanced cornering, lean slightly into the direction of the turn.
How to Stop
For controlled stops, apply the brake by stepping on the rear brake. Razor recommends that you practice applying
the brake at various speeds and in an open area free from obstructions before riding your scooter around others.
USAGE
Deck and Handlebars
Check for cracks or broken connections. Although broken decks
are rare, it is possible for an aggressive rider to run into a curb
or object and wreck and bend or break the deck. Get in the habit
of inspecting your scooter on a regular basis.
Hardware/Loose Parts
Check and secure all fasteners before every ride. Make sure the
collar clamp, quick release lever (select models), and handlebar
spring buttons are locked properly in place before riding. There
should not be any unusual rattles or sounds from loose parts
or broken components. If the unit is damaged, do not ride.
Reference “Safety Warnings” on page 1 of this manual.
Safety Gear
Always wear proper protective gear, such as an approved safety
helmet. Elbow pads and kneepads are recommended. Always
wear closed toe shoes (lace-up with rubber soles) and keep
shoelaces tied and out of the way of the wheels. NEVER RIDE
BAREFOOTED OR IN SANDALS.
Laws and Regulations
Always check and obey any local laws or regulations.
Be Careful!
You will see people on TV and maybe even people you know doing
tricks and stunts. These are people who have been practicing on
scooters for a very long time. Don’t try something until you are
ready. Avoid steep inclines and don’t ride too fast — you can lose
control and fall. Skateboard parks are not designed for scooters.
Never ride in traffic or on the street and watch your surroundings
for pedestrians, bikers, boarders and skaters.
Maintain a hold on the handlebars at all times.
Loading ...
Loading ...