Loading ...
Loading ...
Loading ...
27
EN
Emptying the Water
Container
Condensed water is collected in the water
container.
Empty the water container after every use. Not
doing so will affect the drying performance.
If the water container is full, the D icon glows
and the buzzer sounds while the appliance is
operating. If this should occur, the water container
needs to be emptied within the next hour.
1
Pull out the water container.
2
Empty the water container in the sink.
3
Push it back into the appliance.
4
Press the Start/Pause button.
Cleaning the Cool Air Inlet
Grill
Vacuum the Cool Air Inlet grill 3 - 4 times a year
to make sure there is no build-up of lint or dirt that
may cause improper air flow.
NOTE
• Warm air is expelled through the ventilation
grill.
• Adequate ventilation should be provided to
avoid the back flow of gases into the room from
units burning other fuels, such as open fires.
Wiping the Moisture
Sensor
This device senses the moisture level of the
laundry during operation, which means it must be
cleaned regularly to remove any build-up of lime
scale on the surface of the sensor.
Wipe the sensors inside the drum.
CAUTION
• Do not wipe the moisture sensor with abrasive
materials. Always clean the sensor with a
rough sponge.
Loading ...
Loading ...
Loading ...