Loading ...
Loading ...
Loading ...
49-88060
27
Problem Possible Cause What To Do
Oven does not work or
appears not to work
A fuse in your home may be blown
or the circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
Oven controls improperly set. See the Using the Oven section.
Oven is in Sabbath Mode. Verify, that the oven is not in Sabbath Mode. See the
Special Features section.
“Crackling” or
“popping” sound
This is the sound of the metal
heating and cooling during both the
cooking and cleaning functions.
This is normal.
Why is my range making
a "clicking" noise when
using my oven?
Your range cycles the heating
elements by turning relays on
and off to maintain the oven
temperature.
This is normal.
Clock and timer do not
work
A fuse in your home may be blown
or the circuit breaker tripped.
Replace the fuse or reset the circuit breaker.
Plug on range is not completely
inserted in the electrical outlet.
Make sure electrical plug is plugged into a live,
properly grounded outlet.
Oven controls improperly set. See the Using the kitchen timer section.
Oven door is crooked The door is out of position. %HFDXVHWKHRYHQGRRULVUHPRYDEOHLWVRPHWLPHV
gets out of position during installation.
To straighten the door, push down on the high corner.
Oven light does not
work
Light bulb is loose or defective. Tighten or replace bulb.
Pad operating light is broken. Call for service.
Oven will not self-clean The temperature is too high to set a
self-clean operation.
Allow the oven to cool and reset the controls.
Oven controls improperly set. See the Cleaning the Oven section.
Excessive smoking
during clean cycle
Excessive soil or grease. Press the Clear/Off pad. Open the windows to rid the
room of smoke. Wait until the LOCKED DOOR light
goes off. Wipe up the excess soil and reset the clean
cycle.
Excessive smoking
during broiling
Food too close to burner element. Lower the rack position of the food.
Oven door will not open
after a clean cycle
Oven too hot. Allow the oven to cool below locking temperature.
Oven not clean after a
clean cycle
Oven controls improperly set. See the Cleaning the Oven section.
Oven was heavily soiled. Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
"LOCK DOOR" flashes
in the display
The self-clean cycle has been
selected but the door is not closed.
Close the oven door.
LOCKED DOOR light is
on when you want to
cook
The oven door is locked because
the temperature inside the oven
has not dropped below the locking
temperature.
Press the Clear/Off pad. Allow the oven to cool.
“F— and a number
or letter” flash in the
display
You have a function error code. Press the Clear/Off pad. Allow the oven to cool for
one hour. Put the oven back into operation.
If the function code repeats. Disconnect all power to the oven for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
Troubleshooting tips (Cont.) ... Before you call for service
TROUBLESHOOTING TIPS
Loading ...
Loading ...
Loading ...