Loading ...
Loading ...
Loading ...
We advise you to use the special SENSEO
®
Descaler (HD7012/HD7011/
HD7006). Read the instructions on the package of the descaling agent.
Never use a descaler based on mineral acids such as sulphuric acid,
hydrochloric acid, sulphamic acid and acetic acid (e.g. vinegar).
These descalers may damage your SENSEO
®
coffee machine.
Descaling procedure
1 Mix 50 grams of citric acid with 1 litre of water in a measuring jug.
Stir until the powder is completely dissolved.
2 Fill the water reservoir up to the MAX indication with the descaler
mixture. Then put the water reservoir back into the coffee
machine (Fig. 3).
Note: Not all SENSEO
®
machine types have a water reservoir with a capacity
of 1 litre. If you have a SENSEO
®
machine with a smaller water reservoir,
repeat steps 2 to 6 with the remainder of the mixture without lling the water
reservoir up to the MAX indication.
3 Press on/off button I.
The machine is ready for use when the indicator light lights up continuously.
4 Place the 1-cup holder ° with a used coffee pod in it in the coffee
machine. Close the lid and make sure it is properly locked.
Note: Always put a used coffee pod in the pod holder when you descale the
machine. This pod serves as a ‘lter’ to prevent the sieve or hole in the pod
holder from getting clogged with scale residue.
5 Put a bowl with a capacity of at least 1500ml under the spout to
collect the descaling mixture (Fig. 8).
6 Press the 2-cup button °° and let the machine operate.
Repeat this until the water reservoir is empty.
Never interrupt the descaling process.
7 Repeat steps 1 to 6. Replace the used pod with another used pod to
lter out the scale residue.
Note: To descale properly, you have to use 2 litres of descaling mixture.
Never descale the SENSEO
®
coffee machine with the lid open.
Make sure the lid is properly locked.
8 Rinse the water reservoir with tap water. Fill the water reservoir up
to the MAX indication with tap water and repeat steps 3 to 6.
Note: Do not rell the water reservoir with used hot water or the used
descaling mixture.
9 Fill the water reservoir with fresh tap water up to the MAX
indication again and repeat steps 3 to 6 once more.
Note: Always rinse the machine by letting it empty two full water reservoirs.
10 Remove the used pod and clean the pod holder after descaling to
prevent the sieve or hole in the centre from getting clogged.
Frost-free storage
If the coffee machine has already been used and therefore has been ushed
with water, it may only be used and stored in a frost-free place to prevent it
from becoming damaged.
Ordering accessories
To buy accessories or spare parts, visit www.shop.philips.com/service
or go to your Philips dealer. You can also contact the Philips Consumer Care
Centre in your country (see the worldwide guarantee leaet for contact details).
Recycling
- This symbol on a product means that the product is covered by European
Directive 2012/19/EU. Inform yourself about the local separate collection
system for electrical and electronic products. Follow local rules and never
dispose of the product with normal household waste. Correct disposal of
old products helps prevent negative consequences for the environment
and human health (Fig. 18).
Guarantee and support
If you need information or support, please visit www.philips.com/
support or read the separate worldwide guarantee leaet.
The purchase of the Philips SENSEO
®
coffee machine does not exhaust
any of the rights of D.E. Master Blenders 1753 or Philips under any of their
patents nor does it confer upon the purchaser a licence under these patents.
Always return the machine to a service centre authorised by Philips for
examination or repair. Do not attempt to repair the machine yourself,
otherwise your guarantee becomes invalid.
Cleaning the machine
Never immerse the SENSEO
®
coffee machine in water.
Never clean the machine by ushing it with the lid open.
Cleaning the coffee machine
1 Always unplug the machine before you clean it.
2 Clean the outside of the machine with a moist cloth.
3 Remove the coffee spout (Fig. 11).
, You can disassemble the coffee spout for more thorough cleaning (Fig. 12).
4
Clean the coffee spout, the pod holders and the drip tray in hot water,
if necessary with some washing-up liquid, or in the dishwasher (Fig. 13).
5 Hold the cup tray in your hand while you clean it with hot water,
if necessary with some washing-up liquid (Fig. 14).
You can also clean the cup tray in the dishwasher.
To clean the cup tray, always remove it from the machine, as it might
prove sharp when it is handled incorrectly. Always handle it carefully.
6 Clean the pod holders in hot water, if necessary with some washing-
up liquid, or in the dishwasher (Fig. 15).
Make sure the sieve in the centre of the pod holder is not clogged. If the
sieve is clogged, unclog it by rinsing the pod holder under a running tap.
If necessary, use a washing-up brush to unclog the sieve.
7 Clean the water reservoir in hot water, if necessary with some
washing-up liquid (Fig. 16).
Note: If you use a washing-up brush, be careful not to damage the valve in the
bottom of the water reservoir.
8 Rinse the parts with fresh water after cleaning and put them back
into the machine.
9 Clean the water distribution disc with a moist cloth (Fig. 17).
Be careful when you do this. Make sure that the rubber sealing ring does
not get stuck under the edge of the water distribution disc. If it does,
the coffee machine starts to leak.
Flushing the coffee machine
If you have not used the coffee machine for three days, ush it with fresh
water before you use it again.
Flush the machine in the following way:
1 Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine. (Fig. 3)
2 Put the 1-cup pod holder ° or the 2-cup pod holder °° in the
machine without pod(s). (Fig. 6)
3 Put a bowl (with a capacity of at least 1500ml) under the coffee spout
to collect the water (Fig. 8).
4 Press the on/off button I and subsequently press the 1-cup button
° and the 2-cup button °° briey at the same time.
The machine lls itself with water from the water reservoir. This takes some
time and you will probably not notice that this happens. After a while,
the machine starts to ush and switches itself off after the ushing cycle.
Descaling
When to descale
Descale the SENSEO
®
coffee machine frequently. Preferably descale
4 to 6 times a year, but at least once every 3 months. Descaling takes
about 1 hour. Do not interrupt the descaling process.
Why to descale
Scale builds up inside the machine during use. It is essential to descale the
SENSEO
®
coffee machine at least every 3 months. Your reasons to descale:
- It prolongs the life of your SENSEO
®
coffee machine
- It ensures maximum cup volume
- It ensures maximum coffee temperature
- The machine produces less sound during brewing
- It prevents malfunctioning
If the descaling procedure is not performed correctly, scale residue remains
behind in the machine. This causes scale to build up more quickly and may
cause permanent and irreparable damage to the machine.
Use the correct descaler
Only citric acid-based descalers are suitable for descaling the SENSEO
®
machine. This type of descaler descales the machine without damaging it.
For the correct amount, see under ‘Descaling procedure’ below.
Each descaling mixture can be used only once. After use, the descaling
mixture is no longer active.
Loading ...
Loading ...
Loading ...