Loading ...
Loading ...
Placing a pod holder
1 Move the lever upwards to release the lid (Fig. 4).
2 Open the lid.
3 Place the appropriate pod holder in the machine.
Note: Make sure the pod holder is clean and the sieve in the centre is not
clogged, e.g. with loose coffee grounds.
, If you want to make one cup of SENSEO
®
coffee, use 1 coffee pod in
combination with the 1-cup pod holder ° and the 1-cup button °.
(Fig. 6)
, If you want to make two cups of SENSEO
®
coffee, use 2 coffee pods
in combination with the deeper 2-cup pod holder °° and the
2-cup button °°. (Fig. 9)
Placing one or two pods
Note: Never put normal ground coffee or use torn pods in the
SENSEO
®
machine, as this causes it to become blocked.
1 Place the SENSEO
®
coffee pod(s) properly in the centre of the
pod holder, with the convex side pointing downwards.
, Place 1 SENSEO
®
coffee pod in the 1-cup pod holder °.
, Place 2 SENSEO
®
coffee pods in the 2-cup pod holder °°.
Note: Use SENSEO
®
coffee pods from Douwe Egberts specially designed for
your SENSEO
®
coffee machine for a full and round taste.
Note: Make sure the coffee in the pod(s) is evenly distributed and press the
pod(s) lightly into the pod holder.
2 Close the lid and lock the lever (Fig. 7).
Always make sure the lid is properly locked. Push down the lever until it
snaps home with a click.
Never start brewing with the lid open. The lid must be properly closed.
3 Place one cup or two cups under the spout openings (Fig. 10).
The cups you use should have a capacity of at least 150ml. Do not use cups
that are too large, as they cause the coffee to get cold more quickly.
4 Press the button that indicates the number of cups of SENSEO
®
coffee you want to brew.
- ° for one cup
- °° for two cups
, The SENSEO
®
coffee machine starts brewing.
- The machine automatically supplies the optimal amount of water.
- You can interrupt the brewing process at any time by pressing the
on/off button I. If you switch the machine back on after you have
interrupted the brewing process, the machine does not complete the
interrupted brewing cycle.
Do not remove the water reservoir during a brewing cycle,
as this will cause the machine to draw in air. When this happens,
the next cup will only be partly lled.
Note: If you only get a small quantity of coffee or no coffee at all
out of the machine, you have not ushed the machine properly
before rst use. As a result, the boiler is not or not completely
lled. Flush the machine properly (see chapter ‘Preparing the
machine for use’) before you brew another cup of coffee.
5 After use, lift the pod holder out of the machine and remove the
coffee pod(s).
Be careful when you do this, for there may still be some water/coffee on
the coffee pod(s).
Interrupting the brewing process
1 Press the on/off button I to interrupt the brewing process.
Note: If you switch the machine back on after having interrupted the brewing
process, the machine does not complete the interrupted brewing cycle.
Switching off
1 After use, press the on/off button I to switch off the machine.
Note: If you do not switch off the machine, it switches off automatically after
30 minutes.
First use
Unpacking
1 Remove the machine from the box.
Note: Make sure you store the 2-cup pod holder in a safe place. It is an
essential part of the machine.
Flushing the machine to ll the boiler
You cannot brew coffee if you have not ushed the SENSEO
®
coffee machine rst!
The ushing cycle causes the boiler to ll with water. After this,
the coffee machine is ready for use.
Flush the machine in the following way:
1 Remove the water reservoir (Fig. 2).
2 Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine. (Fig. 3)
3 Move the lever upwards to release the lid (Fig. 4).
4 Open the lid (Fig. 5).
5 Put the 1-cup pod holder ° or the 2-cup pod holder °° in the
machine without pod(s). (Fig. 6)
6 Close the lid and lock the lever (Fig. 7).
Note: Make sure you lock the lever properly. Push it down until it snaps home
with a click.
Note: Never ush the machine with the lid open. The lid must be properly locked.
7 Put the plug in an earthed wall socket.
8 Put a bowl (with a capacity of at least 1500ml) under the coffee spout
to collect the water (Fig. 8).
9 Press the on/off button I and subsequently press the 1-cup button
° and the 2-cup button °° briey at the same time.
, The boiler lls itself with water from the water reservoir. This takes
some time (approx. 90 to 150 seconds). The machine switches off
automatically when the ushing cycle ends. During the ushing cycle,
the machine produces more noise than during a regular brewing cycle.
Note: Before you use the machine for the rst time, clean the coffee spout
and the pod holders with hot water and some washing-up liquid or in the
dishwasher. Clean the water reservoir thoroughly in hot water, if necessary
with some washing-up liquid.
Now your Philips SENSEO
®
coffee machine is ready for use.
Brewing SENSEO
®
coffee
Tips for the best SENSEO
®
quality
- Use fresh water every time.
- Use the SENSEO
®
coffee pods that have been specially developed by
Douwe Egberts for your SENSEO
®
coffee machine for a full, round taste.
Filling the water reservoir
1 Fill the water reservoir with cold water up to the MAX indication
and put it back onto the machine. (Fig. 3)
Never pour milk, coffee, hot water or carbonated water into the water
reservoir.
- ° MIN: minimum amount of water required to brew 1 cup of
SENSEO
®
coffee.
- °° MIN: minimum amount of water required to brew 2 cups of
SENSEO
®
coffee.
- A full reservoir allows you to make SENSEO
®
coffee a number of times
(up to 5 cups (HD7810, HD7812) or up to 10 cups (HD7811).
This makes it unnecessary to ll the water reservoir each time you
want to make a cup of coffee.
Switching on the machine
1 Press the on/off button I.
The indicator light ashes while the water heats up. Heating up takes
approx. 90 seconds.
, The coffee machine is ready for use when the indicator light lights
up continuously.
Loading ...
Loading ...
Loading ...