Loading ...
Loading ...
Loading ...
Rinnai Australia 9 RCE-470/670 TRE
A dedicated 240V 10 Amp power point must
be used with this appliance.
Do not use power boards or double adaptors
to operate this appliance.
Heater must not be located below a power
socket-outlet.
Heat emanating from the front of this appliance
may over time affect the apperance of some
materials used for flooring such as carpet, vinyl,
cork or timber. This effect may be amplified if the
air in the room contains cooking vapours or
cigarette smoke. To avoid this possibility, it is
recommended that a mat be placed in front of this
appliance, extending at least 750 mm in front of it.
During peak operating periods the filters
should be cleaned weekly, however if the
“FILTER” warning indicator flashes in the
control panel display, turn off the appliance
immediately and clean filters before further
use.
When the heater is operated for the first time
or after long periods of non use a slight odour
may be emitted, this is normal.
However if odours persist switch off the
appliance and contact Rinnai.
IMPORTANT POINTS
O
N
/
O
F
F
S
E
T
O
N
/
O
F
F
S
E
T
Loading ...
Loading ...
Loading ...