Loading ...
Loading ...
Loading ...
5
EN
Do not spray water or inflammable substances (toothpaste,
alcohol, thinner, benzene, flammable liquid, abrasive, etc.) over
the interior or exterior of the appliance to clean it.
Do not clean the appliance with brushes, cloths or sponges with
rough surfaces or which are made of metallic material.
Only qualified service personnel from LG Electronics service
centre should disassemble, repair, or modify the appliance.
Contact an LG Electronics customer information centre if you
move and install the appliance in a different location.
Do not use a hair drier to dry the inside of the appliance or place
a candle inside to remove the odours.
Do not tilt the appliance to pull or push it when transporting.
Make sure not to get a body part such as a hand or foot stuck
while moving the appliance.
Risk of Fire and Flammable Materials
If a leak is detected, avoid any naked flames or potential sources
of ignition and air the room in which the appliance is standing for
several minutes. In order to avoid the creation of a flammable gas
air mixture if a leak in the refrigerating circuit occurs, the size of
the room in which the appliance is used should correspond to the
amount of refrigerant used. The room must be 1 m² in size for
every 8 g of R600a refrigerant inside the appliance.
Refrigerant leaking out of the pipes could ignite or cause an
explosion.
The amount of refrigerant in your particular appliance is shown on
the identification plate inside the appliance.
Installation
This appliance should only be transported by two or more people
holding the appliance securely.
Install the appliance on a firm and level floor.
Do not install the appliance in a damp and dusty place. Do not
install or store the appliance in any outdoor area, or any area that
is subject to weathering conditions such as direct sunlight, wind,
rain, or temperatures below freezing.
Loading ...
Loading ...
Loading ...