Loading ...
Loading ...
Loading ...
Page 14
6. Secure your hob to the counter by using
the clamp and the screws supplied.
*
min. 20 & max. 40 mm
1
Hob
2
Screw
3
Installation clamp
4
Counter
5
Putty
Rear view (connection holes)
Place the burner plates, burner plate caps
and grills back to their seating after
installation.
Making connections to different
holes is not a good practice in
terms of safety since it can
damage the gas and electrical
system.
5. For other minor adjustments or if the
appliance does not perform correctly
contact: Beko A and NZ Pty Ltd 1300 282
356
Final check (installer to check before
leaving)
1. Open gas supply.
2. Check gas installations for secure fitting
and tightness.
3. Ignite burners and check appearance of
the flame.
4. Gas leakage, setting the test point, setting
the turndown, ensuring complete ignition
of all burners.
Natural Gas: the supplied regulator must be
fitted to the appliance inlet connection. Gas
pressure must be adjusted to 1.0 kPa when
approximately 50% of the burners are on
high flame, the appliance test point is
located on the regulator.
LPG: the supplied test point adaptor must be
fitted to the appliance inlet connection. Gas
pressure must be adjusted to 2.75 kPa, the
appliance test point is located on the test
point adaptor.
Gas leakage and operation of the appliance
must be tested by the installer before
leaving. Check burner flames are blue in
colour, stable and completely ignite at both
high and low flame settings with no
appreciable yellow tipping, carbon
deposition, lifting, floating, lighting back or
objectionable odour. Test burners
individually and in combination. When
satisfied with the operation of the cooker,
please instruct the user on the correct
method of operation.
In case the appliance fails to operate
correctly after all checks have been carried
out, refer to the authorized service provider
in your area.
Where the data plate is obscured by
cabinetry when the cooker is in the installed
position, place the supplied duplicate data
plate to a suitable adjacent surface or within
the instruction manual for future reference.
Loading ...
Loading ...
Loading ...