Loading ...
Loading ...
Loading ...
1514
Temperature Compensaon Adjustment
Ÿ Press the Memory/baby button to adjust the temperature from ±0.0 to ±2.0.
Ÿ When the thermometer is turn on, press both the Memory/Baby button and
Measure button for 5 seconds to go to the temperature compensation mode.
Note
All the future temperature you are taking will be automatically added the value you are
adjusted.
Turn off Thermometer
The unit will shut down automatically after 10 seconds of no use. Or you can keep
pressing the Measure button for 6 seconds.
Cautions
Ÿ All memory records will loss when uninstall or reinstall the battery.
Ÿ All settings will come to default when uninstall the battery. If need adjust the
settings, please power on and make the new settings.
The Battery Replacement
Slide down the battery cover along the marked direction. Put two AAA batteries correctly
into the compartment.
Remove the batteries if the thermometer will not be used for more than two months.
Cautions
7. TIPS TO MAKE CORRECT TEMPERATURE MEASUREMENTS
Ÿ It is important to know everyone’s normal temperature when they are well. This is
the only way to accurately diagnose a fever.
Ÿ Record readings twice a day (early morning and late afternoon). Take the average of
the two temperatures to calculate normal oral equivalent temperature.
Ÿ Always take the temperature in the same location, since the temperature readings
may vary from different locations on the forehead.
Ÿ Holding the thermometer for too long in the hand before taking a measurement can
cause the device to warm up. This means the measurement could be incorrect.
Ÿ Patients and the thermometer should stay in steady-state room condition for at least
30 minutes.
Ÿ A child’s normal temperature can be as high as 99.9°F (37.7) or as low as 97.0°F
(36.11). Please note that this unit reads 0.5ºC (0.9°F) lower than a rectal digital
thermometer.
Ÿ Before placing the thermometer sensor onto the forehead, remove dirt, hair, or
sweat from the forehead area.
Ÿ Wiping the forehead with a warm or cool cloth may impact your reading. It is advised
to wait 10 minutes before taking a reading.
Ÿ Use an alcohol swab to carefully clean the sensor and wait for 5 minutes before
taking a measurement on another patient.
8. MULTI MEASUREMENTS REQUIREMENTS
Ÿ Newborn infants in the rst 100 days.
Ÿ When the user is learning how to use the thermometer for the rst time until he/she
has familiarized himself/herself with the instrument and obtains consistent readings.
Ÿ Children under three years of age with a compromised immune system and for
whom the presence or absence of fever is critical.
In the following situations 3-5 measurements recommended to be taken in the same
location. The highest one is the standard reading.
9. KEY FACTORS THAT INFLUENCE EAR TEMPERATURE READINGS
Some external factors that may inuence ear temperature, include:
Ÿ been exposed to very hot or very cold temperatures, or
Ÿ been recently swimming or bathing
Ÿ been lying on one ear or the other
Ÿ had their ears covered
Loading ...
Loading ...
Loading ...