Loading ...
Loading ...
Loading ...
Aura Plus
Operation
6
To connect using the Harman Kardon remote app:
1. Go to the Apple App store or Google Play store and down-
load the Harman Kardon Remote app.
2. Click + icon on the home screen to add a new device to your
network and choose Harman Kardon Aura from the list.
3. Follow the setup instructions in the app.
Ad-hoc Mode
If you have a Mac or PC computer, or other phone or tablet, use the following method
to connect to the system:
1. Put the Harman Kardon Aura Plus into Ad-hoc mode by touching the
Wi-Fi button for more than 5 seconds (ensure there are no USB de-
vices plugged into the USB port). The Wi-Fi LED will flash twice.
2. Go to the Wi-Fi Settings page on your Mac, PC or Phone and
connect to the network with the name HK_Aura*****.
This may take around 40 seconds depending on your device.
3. Open your web browser and enter the IP address as
192.168.1.1 in the address bar of your browser.
4. Select the name of the Wi-Fi network you want
to connect from the drop-down menu.
5. Enter the password for your network and click Save.
6. Ensure that you have entered the password correctly. If you are
not sure, enter the password again without any mistake.
The Harman Kardon Aura Plus will then attempt to connect to your Wi-Fi network.
This may take up to one minute depending on your Wi-Fi router. If the connection is
successful, the Wi-Fi LED will turn green and the connection successful tone can be
heard. If the connection is unsuccessful or your password incorrect, the Wi-Fi LED will
flash quickly. To try again, start from step 1.
NOTE: To restore the factory default settings, long press Source and Power
button in Operational mode.
Operation
Switching to Different Power Modes
The power button on the side panel of the Harman Kardon Aura Plus allows you to set
the wireless speaker to any of the following power modes:
• Operational mode
• Sleep mode
• Standby mode
• Off mode
To change the power modes:
• Press the power button to enter into Operational mode from Standby mode.
• Press the power button again if you want to make the system enter into
Standby mode from Operational mode.
Loading ...
Loading ...
Loading ...