PREPARE
CHANGE AN EXISTING PIN*
PROGRAM INITIAL PIN
1
? ? ? ?
Press the programmed PIN
that you want to change.
...the light bulb blinks twice.
2
Press and hold the
# button until...
3
+
? ? ? ?
new PIN
Enter the new 4-digit PIN of your choice,
then press the ENTER button.
4
To test, press the new PIN,
then the ENTER button.
The garage door opener
will activate.
The light bulb will blink once.
Enter a 4-digit personal identification
number (PIN) of your choice:
Then press the # button.
2
? ? ? ?
To exit programming
mode, press the
0 button.
4
The garage door
opener will activate.
7
To test, press
the PIN, then
press the ENTER
button.
Press and hold
the and #
buttons until
the lights on
the keypad
stop blinking.
1
*
3
Press and release the Enter button the number of times that
corresponds with the garage door opener type:
# of Presses Garage Door Opener Type
1
2
3
4
Security+ 2.0
®
(Yellow Learn Button)
315 MHz Security+
®
(Purple Learn Button)
390 MHz Security+
®
(Red/Orange Learn Button)
390 MHz Billion Code (Green Learn Button)
Learn
Button
5
Press and release the Learn
button on the garage door
opener.
Within 30 seconds...
The Learn LED will light.
Enter the 4-digit personal identification
number (PIN) programmed in step 2
then press and release the Enter button
until the garage door opener lights flash
or two clicks are heard.
6
Click
Click
Locate the Learn button on the garage door
opener.
NOTE: Your garage door opener may
look different.
Learn
LED
Learn
LED
OR OR
Learn
LED
Green or
Red/Orange
Purple
Yellow
To prevent possible SERIOUS INJURY or DEATH from a moving gate or garage door:
• Install Keyless Entry Control within sight of the garage door, out of reach of children at a minimum height of 5 feet (1.5 m), and away from ALL
moving parts of door.
• ALWAYS keep remote controls out of reach of children. NEVER permit children to operate, or play with remote controls.
• Activate gate or door ONLY when it can be seen clearly, is properly adjusted, and there are no obstructions to door travel.
• ALWAYS keep gate or garage door in sight until completely closed. NEVER permit anyone to cross path of moving gate or door.
To program the Keyless Entry to more than one garage door opener, repeat the steps above using a new PIN for each additional garage door opener.
WIRELESS KEYLESS ENTRY • MODELS 940EV AND 940EVC
For use with Chamberlain 315 MHz or 390 MHz garage door
openers manufactured after January 1, 1993. The garage door
opener activates when the 4-digit Personal Identification Number
(PIN) and ENTER button are pressed on the Keyless Entry.
Install the battery and program the Keyless Entry prior to
installation. Make sure the garage door opener has a working
light bulb because it is a programming indicator.
* For garage door openers that have a green Learn button or an external receiver repeat "Program Initial PIN" to change the existing PIN. Para Manual en Español ir a:
www.chamberlain.com/CatalogResourcesV3/en-us/shared/files/tucmanuals/114A3926SP.pdf
Loading ...
