Loading ...
Loading ...
Loading ...
en Programme default settings
22
Starching
Note: Laundry should not be treated
with fabric softener.
1. Switch on the appliance.
2. Select the Rinse / Freshen Up
programme.
3. Pour liquid starch into
compartment À Á in accordance
with the manufacturer's instructions
(clean first if necessary).
4. Press the Ü button.
Dyeing/bleaching
Dye should only be used in normal
household quantities. Salt may damage
stainless steel. Always follow the dye
manufacturer's instructions.
Do not use the washing machine to
bleach clothes.
0 Programme default
settings
Programme default settings
The programme default settings are
displayed in the main menu after
selecting the programme.
Display panel ~ Page 12
You can change the default settings:
■ Temperature , Spin speed and
Finish in as long as the arrow is
displayed in the main menu and/or
■ the i-Dos settings ~ Page 12,
~ Page 23
An overview of all programme settings,
which can be selected depending on
the programme, can be found from
~ Page 16.
Temperature
Depending on what stage the
programme is in, you can change the
set temperature before and during the
programme.
The maximum temperature that can be
set depends on the programme that has
been selected.
Spin speed
(Spin)
Depending on what stage the
programme is in, you can change the
spin speed (in rpm; revolutions per
minute) before and during the
programme.
The maximum speed that can be set
depends on the model and programme
that has been selected.
Auto Intensive *
More intensive treatment of the laundry;
The degree of soiling and the type of fabric are automatically
detected and the washing sequence and intelligent dosing are
adjusted accordingly.
Max. 6 kg
60 °C
1400** rpm
$, ç
Detergent è, fabric softener è
Programme/Type of laundry/Instructions Settings
* The programmes and additional programme settings are model-dependent. The programmes/settings
that are available can either be selected directly on the control panel or under Others Programmes or
Options ×.
** The maximum spin speed depends on the programme and model
*** Reduced load for the speedPerfect ( setting
Loading ...
Loading ...
Loading ...