User Manual Samsung VS15T7036R5/SA Jet 70 Complete Vacuum cleaner

Samsung VS15T7036R5/SA Jet 70 Complete Vacuum cleaner - Use Manual - Use Guide PDF.
Documents: Go to download!
  • User Manual - (English)



See other models: SM-F700UZPDATT SM-P610NZAEXAC SM-G986UZKEXAA SM-T860NZALXAC QN55Q70TAFXZC

Samsung VS15T7036R5/SA | File type: PDF | Filename: 11855305_vs15t7036r5-sa.pdf | Size: 7.77 MB | Language: English

Download User Manual

Product Infomation and Reviews - VS15T7036R5/SA photo

VS15T7036R5 SA Photo

Samsung in United States

1-800-726-7864 Mon - Fri: 8AM - 12AM (EST) / Sat - Sun: 9AM - 11PM (EST) Sat - Sun: HOME APPLIANCE 9AM - 6PM (EST)

Samsung VS15T7036R5/SA Questions and Answers


#1 Installing the docking station
Install the docking station in a place without obstacles
or a danger of falling, where the floor and wall are level.
Make sure that the docking station is always plugged in
and turned on. (Always turn on the power of the docking
station.)
If power is not supplied to the docking station, the
POWERbot will be unable to find it and will not
automatically recharge.
Docking station: Connect the battery charger jack to the
docking station.
Battery charger: Connect the power cord to the battery
charger (the side with the sticker attached must be face
down).
Power cord: Plug the power cord into an outlet.

#2 Steps for cleaning the dustbin and filters
While the Jet Stick vacuum is turned off, press the
dustbin release button, which is signified by the number
1 in the below diagram, and then pull the dustbin down
as shown in the picture below
Pull the washable micro filter out by holding the filter
handles located inside the filter.
While pressing the button , turn the dustbin cover and
remove it from the dustbin.
Remove the dust from the metal mesh grille filter by
using the combination tool.
After emptying the dustbin, clean the dustbin and filter
under running water and leave it to dry in the shade out
of direct sunlight.
Reassemble the dustbin cover by aligning the dustbin
release button with the groove on the dustbin.
Put the washable micro filter in the dustbin cover by
fitting the groove on the filter first as shown in the
picture below.
Assemble the dustbin to the vacuum until you hear a
click by following the order shown in the picture below.

#3 Checking your Jet Stick Display
Your Jet Stick will come with a display that lets you
know when it may need some simple maintence, and
indicate what operation is being used. If you are unsure
what the icons on your Jet Stick means, here is a quick
guide:
01. Clogged: when the dustbin, pipe, or suction part is
clogged.
For a guide on how to clean the dustbin and filters of
your Jet Stick
02. Spinning brush stick: when foreign matter is clogged
in the spinning brush.
For a guide on how to remove foreign matter from your
spinning brush
03. No filter: when the washable micro filter is not
assembled properly.
For steps on properly reassembling the dustbin and
filters of your Jet Stick
04. Suction power: it displays the selected, current
suction power.
05. Wet brush cleaning mode: only when the wet brush
is assembled.
If the 3 icons at the top of your display starts blinking a
few times or lights up red and the vacuum stops
operation, please refer to the guides linked under the
respective icons for maintenance steps.