Loading ...
Loading ...
Loading ...
29
Cleaning and Maintenance
Replacing Interior Halogen Oven Lights
Do not touch bulb with bare hands. Clean off any signs of oil from the bulb and handle with a
soft cloth.
Power Failure
Do not attempt to use during a power failure. Unit will not function.
CAUTION
DISCONNECT THE ELECTRIC POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BEFORE REPLACING BULB.
1. Unsnap glass light cover using a screwdriver in the access groove.
2. Firmly grasp light bulb and pull out.
3. Replace with halogen bulb using volt and wattage requirements listed on
glass cover.
4. Replace the light cover by snapping glass cover onto metal box.
5. Reconnect power at the main fuse or circuit breaker.
access
groove
light
bulb
glass light
cover
PROBLEM POSSIBLE CAUSE AND/OR REMEDY
1. Oven will not function. Oven is not connected to electrical power.
Have electrician check power circuit breaker,
wiring and fuses.
2. Oven does not Door is not shut tight enough for
operate in self-clean. automatic door latch to lock.
3. Oven is not clean Temperature control knob not rotated all
after self-clean cycle. the way past clean until it stops.
4. Broil does not work. Temperature control knob is rotated too
far past broil position.
5. Door will not open. Oven is still in self-clean mode. If oven is
hot, door latch will release when a safe
temperature is reached.
6. Oven light will not work. Light bulb is burned out.
Oven is not connected to power.
7. Strong odor and/or smoke This is normal burn-off of insulation and
is noticed first few time oven protecitve oils in the oven. This will go away
is used. after using oven a few times.
Trouble Shooting Guide
Loading ...
Loading ...
Loading ...