Loading ...
Loading ...
Loading ...
EXHAUST HEPA FILTER REPLACEMENT
EXHAUST FILTER STYLE EF-1
The EXHAUST HEPA FILTER must be
replaced when it becomes dirty. The
timing between replacement intervals will
depend on the use conditions the vacuum
cleaner is exposed to, The EXHAUST
HEPA FILTER should be checked when
changing the dust bag. The filter
CANNOT be washed as it will lose its
dust trapping ability.
1. Remove EXHAUST HEPA FILTERcover
by pressing the release tab on the cover
and rotating out
from vacuum
cleaner.
Exhaust
Fiffer Cover
Press
Filter
Cover
Release
Tab
2. Remove the filter
cartridge from cover.
Exhaust
Filter
Seal Against Cover
Vacuum
Cleaner _k
Body
Exhaust
Fiffer
4. Replace the
EXHAUST HEPA
FILTERcover by
placing bottom tabs
in slotsand rotating
in until cover snaps
into place.
3. Place new
filter cartridge
into cover
making surethat
airflow arrow on
side of cartridge
points into cover.
Place foam seal
of filter against
the vacuum
cleaner body.
Exhaust
Filter
Cover
/
Exhaust Filter
CARBON FILTER REPLACEMENT
The carbon filter is located in a recess
behind the Exhaust HEPA Filter. The
carbon filter will lose its odor-absorbing
capability over time. It should be
repUacedevery three to six months for
maximum effectiveness.
NOTE: Use replacement carbon filter
KC38KDWAZ000. See part number
detail on PARTSAND FEATURES(page 6).
1. Remove
EXHAUST HEPA
FILTER and cover Press
as outlined in Filter
EXHAUST HEPA Cover
FILTER Release
REPLACEMENT Tab
(page 20).
"_ _ ...... _ 2. Remove carbon
_° filter from recess
in body of vacuum
__ cleaner.
3. Place new
carbon filter into
recess of vacuum
cleaner body as
Fi shown.
4. Replace Exhaust HEPA Filter and filter
cover as outlined in EXHAUST HEPA
FILTER REPLACEMENT (page 20).
- 20 -
Loading ...
Loading ...
Loading ...