Loading ...
Loading ...
Loading ...
6
7
Starting instructions
Please note: the lter is provided with a protective
wrapper around it that needs to be removed before rst use.
- Before turning on the appliance extract the lter from
its housing as explained in the lter maintenance
section.
- Remove the wrapper covering the lter (g.1).
g.1
- Replace the lter in its housing as explained in the lter
maintenance section.
- Connect the appliance to the power outlet.
- The appliance emits three beeps and the power
indicator light (O) also comes on and remains lit while
power to the appliance is on. The appliance goes into
STAND-BY.
OPERATING MODES
Turn on the appliance
- Press/touch the ON/STAND-BY button (A) to turn on the
appliance.
There are two buttons to select the operating modes of
the appliance: heating (F) and cooling fan (M).
- To turn o the appliance press/touch button ON/STAND-
BY (A). The display could show the count down for
about 10 seconds. After that, to completely turn o the
appliance, remove the plug from the socket.
Please note: never turn o the appliance by only
pulling the plug. Press/touch the ON/STAND-BY button
(A) and wait a few minutes before pulling the plug. In this
manner, the appliance can perform the operating status
checks.
Air purication
The product is designed to oer constant air purication from
allergens and pollutants.
The purication function is automatically activated both in
heating and cooling fan modes.
If air purication is desired regardless of the need for heating
or ventilation, it is advisable to set the product in cooling fan
mode using ventilation levels 1 through 5.
Heating mode
- To select this operating mode, press the heating button
(F) on the remote control, the display shows the
symbol (F1); the temperature can be set by pressing
the temperature buttons (
or ) (G) on the remote
control.
At rst pressing, the display will show the current set-
point for some seconds (approx 4-5) together with
the symbol; the temperature can be increased or
decreased by pressing button or respectively.
- The minimum setting is 10°C (50°F) and the maximum
is 28°C (82°F).
- In this mode it is possible to increase or decrease the
fan speed by pressing respectively the speed button
or (L) on remote control; the minimum fan speed
available in heating mode is 1, the maximum is 6.
-
At rst pressing, the display will show the current fan
speed for some seconds (approx 4-5) together with the
symbol.
Please note: the appliance will operate for few
seconds with a reduced airow to allow the preheating in
order to guarantee the best comfort.
Please note: When the set temperature is reached, the
appliance will automatically stop heating, but it may keep
working for a preset time at reduced airflow speed.
The appliance will restart heating again, at the previous
heating settings, as long as needed to maintain the desired
set temperature.
Examples: heating mode
- Press heating button (F), the display shows .
Loading ...
Loading ...
Loading ...