DW80R7060UG/AA User Manual

Loading ...

English28

Operations

06 Sanitize /

(Control Lock)

With the Sanitize option selected, the water temperature is

increased to 163 ˚F (73 ˚C) in the nal rinse cycle for high

temperature sanitization.

If you select the Sanitize option, the "Sanitize" lamp blinks

when the water temperature reaches the sanitary temperature

(over 155 ˚F (68 ˚C)), and then remains illuminated until the

Sanitize option ends.

When you open the door or press the POWER button, the

"Sanitize" lamp turns off.

NOTE

The Normal cycle with the Sanitize option selected is NSF

Certied and operates in accordance with NSF/ANSI Standard

184 for Residential Dishwashers. Certied residential

dishwashers are not intended for licensed food establishments.

Your dishwasher is NSF Certied.

Control Lock allows you to lock the buttons on the control

panel so children cannot accidently start the dishwasher by

pressing the buttons on the panel.

To lock and unlock the buttons on the control panel, hold the

Sanitize button down for three (3) seconds when the power

is On.

07 Display

Displays information about the current cycle including the

cycle time, remaining time, Delay Start settings, and other

cycle-specic information.

If a problem occurs during operation, an information code

appears with a warning sound. Refer to the information codes

on page 47.

08 Delay Start

Delay a cycle for up to 24 hours in one-hour increments.

To increase the delay start time, press or hold the Delay Start

button. The hour displayed indicates the time at which the

wash will start.

- After setting the delay time, press the START button, and

then close the door to start the cycle.

- To change the delay time after the dishwasher has started,

rst turn the dishwasher off and turn it back on. Then,

select a new cycle and change the delay time settings.

DW8000R_DD68-00211A-00_EN.indd 28 2019-04-24  5:59:18

Loading ...

User Manual - Page 28