Loading ...
Loading ...
Loading ...
You can cancel or change the set of
the delay start before you touch the
button . After touching the button
you can only cancel the delay.
To cancel the delay start:
1. Touch the button to set the appliance to
pause.
2. Touch the button Delay Start until the indicator
of the set delay goes off.
Touch the button again to start the
programme immediately.
INTERRUPTING A PROGRAMME AND
CHANGING THE OPTIONS
You can change only some options before they
operate.
1. Touch .
The indicator of this button flashes.
2. Change the options.
3. Touch again.
The programme continues.
CANCELLING A PROGRAMME
1. Press the button On/Off for some seconds to
cancel the programme and to deactivate the
appliance.
2. Press the same button again to activate the
appliance. Now, you can set a new washing
programme.
Before starting the new programme
the appliance could drain the water. In
this case, make sure that the detergent
is still in the detergent compartment, if
not fill the detergent again.
OPENING THE DOOR
While a programme or the delay start operates, the
appliance door is locked. The indicator is on.
CAUTION! If the temperature and
level of the water in the drum are too
high, you cannot open the door.
To open the door during the first minutes of
the cycle or when the delay start operates:
1. Touch the button
to deactivate the
appliance.
2. Wait until the indicator goes off.
3. You can open the door. If necessary add or
remove the items.
4. Close the door and touch the button again.
The programme (or the delay start) continues.
The door can be open when the programme is
complete.
AT THE END OF THE PROGRAMME
• The appliance stops automatically.
• The acoustic signal operates (if it is activated).
• The indicator of the button goes off.
• You can open the door.
• Remove the laundry from the appliance. Make
sure that the drum is empty.
• Press the button On/Off for some seconds to
deactivate the appliance.
• Close the water tap.
• Keep the door and the detergent drawer ajar, to
prevent the mildew and odours.
The washing programme is completed, but
there is water in the drum:
• The drum turns regularly to prevent the creases
in the laundry.
• The indicator flashes to remind you to drain
the water.
• The door lock indicator is on. The indicator
of button flashes. The door stays locked.
• You must drain the water to open the door.
Draining the water:
1. To drain the water.
• Touch the button
. The appliance
drains the water and spins with the
maximum spin speed for selected washing
programme.
• Alternatively, touch the button to change
the spin speed and then touch the button
. The appliance drains the water and
spins. If you set
, the appliance only
drains.
2. Press the button On/Off for some seconds
to deactivate the appliance.
The appliance drains and spins
automatically after approximately 18
hours (except for Wool programme).
AUTO-OFF OPTION
The AUTO-OFF stand-by option automatically
deactivates the appliance to decrease the energy
consumption. All the indicators go off when :
• You do not use the appliance for 5 minutes
before you touch .
12
Loading ...
Loading ...
Loading ...