Loading ...
Loading ...
Loading ...
A
The default position of the flap is A (powder
detergent).
2.
To use liquid detergent:
1. Remove the drawer. Push the drawer edge
in the place with the arrow (PUSH) to remove
the drawer easily.
3.
B
2. Adjust the flap in position B.
3. Put back the drawer in the recess.
When you use the liquid detergent:
• Do not use gelatinous or thick
liquid detergents.
• Do not put more liquid then 120
ml.
• Do not set the delay start.
When the flap is in position B and you want to use
powder detergent:
1. Remove the drawer.
2. Adjust the flap in position A.
3. Put back the drawer in the recess.
• Measure out the detergent and the fabric
conditioner.
• Put the detergent and the fabric conditioner into
the compartments.
• Carefully close the detergent drawer.
ACTIVATING THE APPLIANCE
Press and hold for a couple of seconds the On/Off
button to activate or deactivate the appliance.
A tune sounds when the appliance is activated.
SETTING A PROGRAMME
1. Touch the programme button and set the
programme:
• The indicator of the button flashes
slowly.
2. If necessary, change the temperature and the
spin speed or add available options. When you
activate an option, the indicator of the set
option comes on.
If you set something incorrect, the
indicator of the button flashes red
three times.
STARTING A PROGRAMME WITHOUT THE
DELAY START
Touch the button .
• The indicator of the button
stops to
flash and stays on.
• The programme starts, the door locks, the
indicator is on.
The drain pump can operate for a
short time at the beginning of the
washing cycle.
STARTING A PROGRAMME WITH THE DELAY
START
The start of the programme can be delayed by 9, 6
or 3 hours.
1. Touch the button Delay Start to choose the
delay you want to set.
The indicator of the selected delay is on.
2. Touch the button
:
• The appliance starts the countdown.
• When the countdown is completed, the
programme starts automatically.
11
Loading ...
Loading ...
Loading ...