S1150
Corded
Tripleheader Shaver
Always here to help you
Register your product and get support at
www.norelco.com/register
Question?
Contact
Philips
Norelco
Question?
Contact
Philips
Norelco
2
ENGLISH 4
S1150
Congratulations on your purchase and
welcome to Philips Norelco!
To fully benefit from the support that Philips
Norelco offers, register your product at
www.norelco.com/register
4. Keep the shaver and cord away from heated surfaces.
5. Never drop or insert any object into any opening.
6. Do not use the adapter in or near a power outlet that
contains an electric air freshener to prevent damage to the
adapter.
7. Do not plug in shaver outdoors or operate where aerosol
(spray) products are being used or where oxygen is being
administered.
8. Do not use this shaver with a damaged or broken comb, as
facial injury may occur.
9. Always attach plug to shaver first, then to outlet. Be certain
plug is inserted firmly into
shaver
up to mark indicated on
plug. To disconnect, turn shaver off then remove plug from
outlet.
10. Never put the shaver in direct sunlight or store at a
temperature above 140°F (60ºC).
11. Shaver can be rinsed under running tap water. Never use
water hotter than 175ºF (80ºC). Do not operate shaver
until fully dried.
12. To prevent possible damage to the cord, do not wrap cord
around the shaver.
13. An appliance should never be left unattended while
plugged in.
14. Only use the power plug supplied with the shaver.
SAVE THESE
INSTRUCTIONS
IMPORTANT: The power plug contains a transformer. Do
not cut off the power plug to replace it with another plug, as
this will cause a hazardous condition.
IMPORTANT SAFETY
INSTRUCTIONS
When using an electric appliance, basic precautions should
always be followed, including the following:
Read all instructions before using this appliance.
DANGER
To reduce the risk of electric shock:
1. Do not reach for a corded shaver that has fallen into water.
Unplug immediately.
2. Use shaver only in dry condition. Do not use a shaver while
bathing or in a shower.
3. Do not submerge shaver in water.
4. Do not place or store a shaver where it can fall or be pulled
into a tub or sink. Do not place or drop a shaver into water
or other liquid.
5. Always unplug this shaver from the electrical outlet
immediately after using.
6. Unplug and remove power supply cord from shaver before
cleaning.
WARNING
To reduce the risk of burns, fire, electric shock, or
injury to persons:
1. Close supervision is necessary when this shaver is used by,
on, or near children or invalids.
2. Use this shaver for its intended household use as described
in this manual. Do not use attachments not recommended
by Philips Electronics North America Corporation.
3. Never operate this shaver if it has a damaged cord or
charging plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water while plugged
in. For assistance call 1-800-243-3050.
ENGLISHENGLISH
54
7
Table of Contents
Features ........................................................ 8-9
Put It To The Test & Shaving Tips .............. 10
How to Shave
With An Electric Shaver .......................10-11
Cleaning .................................................... 12-15
Replacing the Shaver Heads ................16-17
Storage ............................................................17
Assistance ......................................................18
Accessories ...................................................18
Warranty ........................................................19
ENGLISHENGLISH
6
45 - DAY MONEY-BACK GUARANTEE
To enjoy the closest and most comfortable shave from your new Philips Norelco
Men’s Shaver, the shaver should be used exclusively for 3 weeks. This allows your
hair and skin enough time to adapt to the Philips Norelco Shaving System. If, after
that period of time, you are not fully satisfied with your Philips Norelco Men’s
Shaver, send the product back along with dated sales receipt and we’ll refund
you the full purchase price. The shaver must be shipped prepaid by insured
mail, insurance prepaid, have the original sales receipt, indicating pur-
chase price, the date of purchase, and the money-back guarantee return
authorization form enclosed. We cannot be responsible for lost mail.
The shaver must be postmarked no later than 45 days from the date of purchase.
Philips Norelco reserves the right to verify the purchase price of the shaver and
limit refunds not to exceed suggested retail price.
To obtain money-back guarantee return authorization form,
call 1-800-243-3050 for assistance. Delivery of refund check will
occur 6–8 weeks AFTER receipt of refund product.
98
Features
CloseCut Blade System
Shaving Unit
Protective Cap
Individually
Floating
Heads
Shaving Unit
Release Button
• Hair Chamber
captures shaven
hair
Electronic
On/Off Button
Corded –
Shaves with a Cord
ENGLISH ENGLISH
Automatic
Worldwide Voltage
100V to 240V AC
Full 2-Year Warranty
45-Day Money-Back
Guarantee
1110
ENGLISH
Put It To The Test & Shaving Tips
◗ 21 Day Trial and Conversion Process. It is a fact
that your skin and beard need time to adjust to
a new shaving system.
◗ Use your new shaver exclusively for 3 weeks
to fully enjoy the closeness of a Philips Norelco
shave.
◗ At first you may not get as close a shave as you
expect, or your face may even become slightly
irritated. This is normal since your beard and
skin will need time to adjust. Invest 3 weeks and
you’ll soon experience the full joy of your new
shaver.
◗ Stick with it! If you alternate shaving methods
during the adjustment period, it may make it
more difficult to adapt to the Philips Norelco
shaving system.
◗ If you are still not convinced after 21 days,
Philips Norelco will refund you the full
purchase price as long as the request is
received within 45 days of purchase.
How To Shave With An Electric Shaver
C ◗ This symbol indicates that the shaver can be
rinsed under running tap water.
◗ For hygienic reasons, the shaver should only
be used by one person.
◗ Use this shaver for its intended household use
as described in this manual.
◗ Shaving with a clean face gives the best
results.
ENGLISH
C 1 Connect power cord to shaver.
2 Plug into any 120V to 240V AC electrical
outlet. Use only the power cord provided.
◗ An adapter plug may be necessary for
cord usage in some foreign countries. Use
an attachment plug adapter of the proper
configuration for power outlet.
Your new shaver will automatically convert
internally to work on 100V to 240V AC systems.
C 3 Turn shaver ON by pressing the on/off
button once. Shave against the direction of
beard growth using circular movements.
4 Stretch your skin with your free hand so
blades can lift and cut whiskers. Gently
press shaver to skin so the floating heads
can follow the contours of your face.
DO NOT press too hard. Too much
pressure can pinch the skin into the combs.
5 Turn shaver OFF by pressing the on/off
button once.
6 Clean the shaver after each use (see
chapter ‘Cleaning’).
C 7 Put the Protective Cap on the shaver to
protect shaver heads.
1312
ENGLISH
Cleaning
◗ Always clean your shaver after each use.
◗ Always switch shaver OFF, unplug and remove
power cord before cleaning.
◗ Never clean, remove or replace head
assembly while motor is on.
◗ Do not apply pressure to combs. Do not
touch shaver heads with hard objects as this
may dent or damage precision-made slotted
combs.
◗ Do not use shaver if combs are damaged or
broken. Facial injury may occur.
◗ Do not use compressed air, abrasives,
scourers or aggressive liquids such as gasoline
or acetone to clean the shaver.
Cleaning the Shaving Unit
The shaver heads may be quickly cleaned after
each use by rinsing with hot water: Water from
the tap should be on a hot setting, BUT BE
CAREFUL TO TEST WATER FIRST SO AS NOT
TO BURN OR SCALD HANDS.
◗ Regular cleaning guarantees better shaving
results.
◗ Do not immerse shaver in water.
◗ While rinsing shaver heads, water may drip
out of the base of shaver. This is a normal
occurrence.
1 Always turn shaver OFF, unplug from
outlet and remove power cord from
shaver.
ENGLISH
C
2 Press the Release Button to open the
shaving unit.
C
3 Clean inside shaver heads and hair
chamber by running under hot water.
C
4 Clean outside of shaving unit by running
under hot water.
5 Close the shaving unit and shake off excess
water.
Be careful not to hit the shaving unit against
anything while shaking off excess water.
6 Open shaving unit again and leave open to
air dry.
NOTE: Do not wipe or dry the shaving heads
with a towel or tissue. This could damage the
shaving heads.
◗ If the shaving unit becomes detached from the
shaver, you can easily reattach it.
1514
ENGLISH
Extra-thorough Cleaning Method
Do not mix up the cutters and combs as the
shaving performance may be adversely affected
for several weeks before optimal shaving
performance is restored.
1 Turn shaver OFF, remove the plug from the
outlet and power cord from the shaver.
C 2 Press the Shaving Unit Release Button to
open the Shaving Unit.
C 3 Pull the shaving unit off the shaver.
C 4 Turn the lock counterclockwise to unlock
(A) and remove the retaining frame (B).
C 5 Remove and clean one set of cutters and
combs at a time.
ENGLISH
C 6 Separate the cutter from the comb and
clean both parts under warm tap water.
Do not clean more than one cutter and comb
at a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C 7 Put the shaving head back into the shaving
unit.
Make sure the notches on both sides of the
shaving head fits exactly onto the projections in
the shaving head holder.
8 Repeat the process for the other two sets
of cutters and combs.
C 9 Replace the retaining frame (A) and turn
the lock clockwise until it locks into
place (B).
C 10 Insert the notch of the shaving unit into
the slot in the top of the shaver and then
close the shaving unit.
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
11 Put the Protective Cap on shaver to
protect heads.
A
B
B
A
1716
ENGLISH
Replacing the Shaver Heads
◗ Replace the shaver heads once a year for
optimal shaving results.
◗ Replace damaged or worn shaver heads with
model SH30 Philips Norelco shaver heads
only.
1 Turn shaver OFF, remove the plug from the
outlet and power cord from the shaver.
C 2 Press the Shaver Head Release Button to
open the shaving unit.
C 3 Pull the shaving unit off the shaver.
C 4 Turn the lock counterclockwise to unlock
(A) and remove the retaining frame (B).
C 5 Remove the shaver heads and place the
new shaver heads in the shaving unit.
Make sure the notches on both sides of the
shaving heads fit exactly onto the projections in
the shaving head holder.
ENGLISH
C 6 Replace the retaining frame (A) and turn
the lock clockwise until it locks into place
(B).
C 7 Insert the notch of the shaving unit into
the slot in the top of the shaver and then
close the shaving unit.
NOTE: If the shaving unit does not close smoothly,
make sure you inserted the shaving heads
properly and that the retaining frame is locked.
This shaver has no other user-serviceable parts.
For assistance call 1-800-243-3050.
Storage
◗ Be sure shaver is turned off. Remove cord
from outlet and shaver before storing in a
safe, dry location where it will not be crushed,
banged, or subject to damage.
◗ Do not wrap power cord around shaver when
storing.
◗ Store cord in a safe location where it will not
be cut or damaged.
◗ Do not place or store shaver where it can fall
or be pulled into a tub or sink, water or other
liquid while plugged in.
C ◗ Put the Protective Cap on shaver to protect
heads.
A
B
B
A
ENGLISH
Assistance
◗ For assistance, visit our website:
www.philips.com/support or
call toll free 1-800-243-3050
◗ Online information is available 24 hours a day,
7 days a week.
Accessories
C
◗ Replacement Heads
Model SH30 - For maximum shaver
performance, replace your Philips Norelco
shaver heads once a year.
◗ Philips Norelco Shaver Accessories may be
purchased at a store near you, or on our
website www.philips.com/store
18
ENGLISH
19
FULL TWO YEAR WARRANTY
Philips Electronics North America Corporation warrants each new Philips Norelco Product,
Models S1150 (except cutters and combs) against defects in materials or workmanship for a
period of two years from the date of purchase, and agrees to repair or replace any defective
product without charge.
IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse,
lack of reasonable care, the affixing of any attachment not provided with the product or loss of
parts or subjecting the product to any but the specified voltage.*
NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES.
In order to obtain warranty service, simply go to www.philips.com/norelco or call 1-800-243-
3050 for assistance. It is suggested that for your protection you return shipments of product
by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this
warranty.
NOTE: No other warranty, written or oral, is authorized by Philips Electronics North America
Corporation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state. Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages, so the above exclusion and limitations may not apply to you.
* Read enclosed instructions carefully.
Manufactured for:
Philips Consumer Lifestyle
A Division of Philips Electronics North America Corporation
P.O.Box 10313, Stamford, CT 06904
This symbol on the product’s nameplate means it is
listed by Underwriters’ Laboratories, Inc.
Norelco and Tripleheader are Registered Trademarks of Philips Electronics North America
Corporation.
is a Trademark of Philips Electronics North America Corporation.
PHILIPS is a Registered Trademark of Koninklijke Philips N.V.
© 2015 Philips Electronics North America Corporation. All Rights Reserved.
