Loading ...
Loading ...
Loading ...
12 13
OPERATING YOUR BREVILLE PRODUCT OPERATING YOUR BREVILLE PRODUCT
BEFORE FIRST USE
Remove and safely discard any packaging
material or promotional labels attached to your
kettle. It is recommended that before first use
to fill the kettle to the maximum level with cold
tap water, bring to the boil by selecting the
BOIL 212° button, then discard the water. Your
kettle will only operate when positioned on
the power base. The kettle will automatically
switch off when the water has reached the
selected temperature.
OPERATION OF YOUR KETTLE
1. To fill the kettle, remove the kettle from the
power base and open the lid by pressing
the lid release button. Fill with the desired
amount of water. Always fill the kettle
between the minimum (500 MIN) and
maximum (1700 MAX) marks on the water
window. Too little water will result in the
kettle switching off before the water has
boiled or reached the selected temperature.
2. Ensure the lid is closed and locked firmly
into place. Position the kettle securely
onto the power base. Insert the power
plug into a 110/120V power outlet. The
START|CANCEL and 212°F BOIL button
surrounds will illuminate in white for one
minute. A beep will sound for two seconds.
The START|CANCEL button surround will
automatically switch off after one minute if
not selected.
NOTE
This appliance is designed for boiling or
heating water only. Never use it to heat or
boil any other liquids or food stuffs. Never
insert tea or coffee into the kettle.
3. Select the desired water temperature
by pressing one of the five variable
temperature buttons. The selected button
and the START|CANCEL button surround
will illuminate in white.
NOTE
If a temperature button is not selected
and the START|CANCEL button is
pressed, the kettle will start heating water
to the default 212ºF or the last selected
temperature.
NOTE
The KEEP WARM function can be
selected before, during or on completion
of the water heating cycle (page 10).
4. Press the START|CANCEL button and the
button surround will illuminate in red and
the kettle will start heating. Do not remove
the kettle from the power base during
operation. Ensure the kettle has switched
off after the water has boiled or the selected
temperature has been reached before
removing the kettle from the power base.
5. When the kettle has heated the water to the
selected temperature, 3 beeps will sound,
the START|CANCEL button surround
illumination will switch off, and the
selected temperature button surround will
illuminate for 1 minute before switching
off.
6. If the KEEP WARM function has been
selected, the KEEP WARM button
surround will remain illuminated in red,
the selected temperature button surround
will remain illuminated in white, and the
kettle will continue to cycle on and off for
20 minutes. If the kettle is removed from
the power base during the KEEP WARM
function the kettle will automatically
switch off.
7. If further heating of the kettle is not
required, unplug the power cord and empty
the water from the kettle. Replace the kettle
onto the power base and close the lid.
NOTE
Through regular use over time, scale
build-up in the kettle can affect the
performance and the life of the kettle.
Lime and phosphate are common forms of
scale that can damage your kettle.
Lime scale, a harmless mineral, comes in
the appearance of white-colored or rusty
looking build up on the inner walls of the
kettle.
Phosphate scale can’t be seen, however,
it can cause the water to appear cloudy
when heated.
To prevent scale from damaging
your kettle, ensure that the kettle is
de-scaled regularly – refer to Care and
Cleaning (Page 17). To avoid scale
build-up, empty the kettle after use and
do not allow water to stand in the kettle
overnight.
NOTE
The default temperature setting of the
kettle when switched on at the power
outlet is 212°F.
When the kettle is unplugged at the
power outlet and plugged back in, it
will automatically default to the 212°F
temperature setting.
When the kettle remains plugged in at the
power outlet and different temperature
settings have been selected, the kettle will
default to the last selected temperature
setting.
WARNING
Do not open the lid during and after
operation. This may result in hot or
boiling water splashing from the kettle.
Pour all the hot water from the kettle
before opening the lid to refill.
NOTE
This kettle must be used only with the
power base supplied. Use caution when
pouring water from your kettle, as boiling
/ heated water and steam will scald. Do
not pour the water too quickly.
NOTE
Always fill the kettle to between the
minimum (500 MIN) and maximum
(1700 MAX) marks on the water window
on the kettle. Too little water will result in
the kettle switching off.
Filling above the maximum mark on the
water window of the kettle may result in
boiling / heated water splashing from the
kettle.
Loading ...