Loading ...
Loading ...
Loading ...
27
FEATURES AND CONTROLS
Hitches
Hitch Installation/Removal
1. Release the wire lock from the 12.7 mm pin and remove the pin.
2. Install the hitch to the receiver.
3. Install the 12.7 mm pin through the bore of both the receiver and the
hitch. Secure the wire lock. Make sure the hitch assembly is secure
at that the wire lock is properly engaged over the pin.
4. To remove the hitch, release the wire lock, remove the hitch, rein-
stall the pin to the receiver and secure the wire lock.
Automatic Transmission Gear Selector
The transmission gear selector is located
on the right side of the vehicle.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
Whenever the vehicle is left unattended, always place the transmission
in PARK. The transmission is locked when it’s in PARK.
NOTICE: Shifting gears with the engine speed above idle or while the vehicle is
moving can cause transmission damage.
Belt Life
To extend belt life, use LOW forward gear when pulling a heavy load at
less than 11 km/h for extended periods and when operating uphill at a
slow speed.
Fuel Tank Cap
Remove the fuel tank cap to add fuel to the fuel tank. Use either leaded
or unleaded gasoline with a minimum pump octane of 87. Do not use E-
85 fuel.
Step 2Step 1 Step 3
Gear
Selector
Fuel Tank
Cap
Loading ...
Loading ...
Loading ...