Loading ...
Loading ...
Loading ...
6
Power
Heating and cool modesRemote control
Remote control docks magnetically.
Attach the remote control to the top of the
appliance with the buttons facing down.
To operate, point the remote control
toward the front of the base.
Each time the heating mode is selected, it
conducts a short calibration cycle. Airflow will
be automatically controlled during this cycle.
Once the calibration cycle is complete, it
will revert to the selected airflow speed.
Press and hold the power button to run through
the target temperatures.
Cool mode
Press the blue thermostat control button to change the target
temperature to 0°C. The power button light will change
from red to blue. To adjust the airflow speed use the airflow
control button.
Heating mode
Press the red thermostat control button until the digital
display shows the desired target temperature. The power
button light will change from blue to red. The red circle will
disappear when the target temperature has been reached.
Standby
ON/OFF
Airflow speed
control
Sleep timer
Personal
heating mode
Oscillation
ON/OFF
Diffused
mode
Thermostat
control
Cool
mode
On first use, the appliance will default to a
temperature 3°C higher than the detected
room temperature. Thereafter, the appliance
will remember the last target temperature set.
Select the desired room temperature. Pressing
the large red button increases the target
temperature by 1°C; the smaller red button
decreases it by 1°C. The appliance will not
operate in heater mode unless the target
temperature is above the room temperature.
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...