Loading ...
Loading ...
Loading ...
6
the cooling efficiency of the appliance as this can affect the airflow.
- If you choose to change the thermostat settings in the fridge compartment, adjust the
thermostat control by one increment at a time.
- Allow 24 hours for temperature to stabilize between adjustments. Do not keep opening and
closing the door once increasing the temperature.
Please note different sections of refrigerator compartment may be warmer or
cooler than others – typically the back wall and bottom lowest shelf will be the
coolest, the top door rack will be the warmest. To avoid frost bite, please don’t
put raw vegetables too close to the coolest area.
HANDLE INSTALLATION
Door handle packing list
Parts Name
Qty
Handles
2
Bolts A1/A2
2*2
Alan key
1
Installation:
• Step1: Use Phillips screw drive to remove four screws from fridge and freezer door.
• Step2: Install two pair of Bolts A1/A2 into fridge and freezer door, please note A1 is
longer and on the left hand side. Use Phillips screw drive to tighten them properly.
• Step3. Put and hold handle on the bolts and secure the bottom grub screws with Alan
key which is supported. Please note the grub screws have been installed in the handle.
• Step4. Install both handle at the same method from top to bottom.
Loading ...
Loading ...
Loading ...