40PFL4907/F7 User Manual

Loading ...

English

4 UseyourTV

SwitchingonyourTVandputtingitin

Standbymode

ToTurnPowerOnortoTurnStandbyOn

• Press

on the side panel or the remote control.

Note

• Energy consumption contributes to air and water pollution. When the AC power

cord is plugged in, your TV consumes energy. Your TV has very low Standby power

consumption.

Adjustingvolume

Toincreaseordecreasevolume

• Press VOLUME −(down) / +(up)on the side panel or press

VOL+/− on the remote control.

Tomuteorunmutesound

• Press MUTE on the remote control to mute the sound.

• Press MUTE again or VOL+/− to recover the original sound.

Switchingchannels

ToselectChannelsbyusingCHANNEL−/+orCH+/−

• Press CHANNEL+(up) / −(down)on the side panel or press

CH+/− on the remote control.

ToselectChannelsbyusingtheNUMBERbuttons

DigitalTVoperation

• For Digital channels, press a number followed by a dot “•” and the

corresponding sub channel number.

– When selecting Digital channel 11.1

Be sure to press • before entering the subchannel number.

Analog/CableTVoperation

– When selecting cable or Analog channel 11

Press PREV.CH to return to the previously viewed channel.

Note

• To select the non-memorized channels, use theNUMBERbuttons.

• ChannelnotavailableorNoSignal will appear on the TV screen after the subchannel

broadcast is over.

• Audioonly message will appear on the TV screen, when you receive only sound signal.

Loading ...

User Manual - Page 15