Loading ...
Loading ...
Loading ...
Product care
1. The new product will have a slight odour which will automatically
remove after using for three or four times.
2. Use on a stable, flat, and level surface. Keep the area clean and dry.
3. Do not use in anywhere near the hot surface.
4. Do not put humidifier in the vents and as far as possible away from
electronic equipment.
5. Use only fresh and clean water. Do not use warm or hot water.
Do not over-fill the water tank
6. Do not add water through the mist outlet. Dry the body with soft and
clean cloth and avoid damages to the machine.
7. When room temperature is below zero, pour all water out of the tank
and avoid damages to the machine.
8. Unplug the product when moving, cleaning, adding water and pouring
water out of the tank.
9. When the machine is working, do not open the top cover and touch
the wind wheel by your hand, nor can you put the hard object into the
machine from the top cover, so as not to cause problems.
11
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,including
interference that may cause undesired operation.
Shenzhen TAT Electronics Co., Ltd.
5F, Tower B, 1st Building, Hedong Hangcheng Industrial Zone,
Xixiang Street, Bao'an District, Shenzhen 518101, China
FCC WARNING
Loading ...
Loading ...
Loading ...