Loading ...
Loading ...
Loading ...
EVSE Operation And Status Information
When the EVSE is first plugged in it will go through an
initialization and self test. For the first three seconds after
plugging in your EVSE all the LED’s will remain off.
After approximately three seconds the EVSE performs an
internal self test and Ground Continuity Test. This pro-
cess takes approximately six seconds.
During the internal self test the unit turns on one Charge
Level Indicator LED every 1.5 seconds until all the
Charge Level Indicator LED’s are illuminated.
AC
LED
Fault
Indica-
tor LED
Charge Level
Indicator LED’s
Time
•••ooo1.5
sec
••••o o 3.0
sec
EVSE Status Indicators
Indicator Description
1 — AC Indicator LED Green indicates READY
RED Indicates a fault
2 — Fault Indicator LED Green indicates READY
RED indicates a fault
3 — Charge Level Indica-
tor LED’s
All ON indicates system ready and
not charging
LED’s turning on and off in sequence
indicates vehicle charging
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 23
Loading ...
Loading ...
Loading ...