Loading ...
Loading ...
Loading ...
The machine will not start
Check
• that the door is properly closed.
• that the main power switch is on.
• that the Delayed Start option has not been
selected. To cancel Delayed Start, press the
Stop button for three seconds.
• that the plug is connected.
• that the main fuses have not blown.
• that the overheating cut-out has not been
triggered.
The machine loses all power during
a program
The overheating cut-out shuts off the tumble dryer
if the temperature is too high, e.g. because dust
is clogging the lint filter.
• Clean the lint filter.
• Wait until the machine has cooled then try
starting it. If it still does not start: Call the
service division.
Drying takes too long
• Check that the lint filter is not blocked. See the
Care and cleaning chapter.
• Empty the condensed water container and
check that the steamer filter and steamer are
not blocked. See the Care and cleaning
chapter.
Error messages
If F10flashes in the display, the condensed water
container is full. Empty the container and restart
the program.
If F29 flashes on the display the steamer filter
needs cleaning. See the section Care and
cleaning.
If F30 is flashing on the display, the maximum
permitted program time has been reached.
17
Troubleshooting
Loading ...
Loading ...
Loading ...