Loading ...
Loading ...
Loading ...
5
Selecting Options
By selecting options, you can tailor a drying
program to suit your requirements. The
available options depend on the selected
program. Once you have started the program, the
options you selected are saved for the next time
you use the same program. The exception is
Delayed Start, which is not saved for the next
time.
Energy Save
You can select Energy Save with all programs
except Revitalise.
• Select Energy Save by pressing the button
next to the symbol.
• The lamp next to the button lights when Energy
Save is selected.
Time saver
You can select Time saver with all programs
except Revitalise. The program is shortened by
about 12 minutes.
• Press the button next to the symbol.
• The lamp next to the button lights when Time
saver is selected.
Anti crease
This option means that the drum will rotate for
three seconds per minute for two hours after the
drying program has finished. The option prevents
the fabrics from remaining in the same position
and becoming creased, if you are unable to
remove them immediately after tumble-drying has
finished. Cannot be selected with the Air fluff
program.
• Select Anti crease by pressing the button next
to the symbol.
• The lamp next to the button lights when Anti
crease is selected.
Delayed Start
Select a program and then press Delayed Start.
Press the button to select a delayed start of 1 to
24 hours. The lamp next to the button lights when
this option is activated. Next press Start and the
machine counts down 1 hour at a time and starts
after the selected delay. To cancel Delayed Start
press and hold Stop for three seconds. Delayed
Start cannot be selected with Timed dry or
Revitalise.
6
Press the Start button
Remaining drying time
An estimate of the remaining drying time
will be shown on the display a few minutes after
the drying program starts. 1:35 means that it will
take approximately 1 hour and 35 minutes for the
load to dry.
The actual remaining time may be longer than the
estimated time shown on the display. The
remaining time is then shown as 0:15 until the
load is sufficiently dry. If you selected Time saver
the display will show 0:05 instead.
You can stop the tumble dryer by pressing the
Stop button or by opening the door. In both cases
the program is stopped and starts from the
beginning if restarted.
NOTE!
The program will not be affected if you change
the program selector after the program has
started.
12
Tumble drying
Loading ...
Loading ...
Loading ...