Loading ...
Loading ...
Loading ...
38
EN
Error Messages
Symptoms Reason Solution
Water supply is not adequate in area.
• Check another tap in
the house.
Water supply taps are not completely open. • Fully open tap.
Water supply hose(s) are kinked. • Straighten hose(s).
The filter of the supply hose(s) are clogged.
• Check the filter of
the supply hose.
If water leakage occurred in the aqua stop
supply hose, indicator will become red.
May vary depending on the model.
• Use the aqua stop
supply hose.
Load is too small.
• Add 1 or 2 similar
items to help balance
the load.
Load is out of balance.
• Add 1 or 2 similar
items to help balance
the load.
The appliance has an imbalance detection
and correction system. If individual heavy
articles are loaded (e.g. bath mat, bath robe,
etc.) this system may stop spinning or even
interrupt the spin cycle altogether.
• Rearrange load to
allow proper
spinning.
If the laundry is still too wet at the end of
the cycle, add smaller articles of laundry to
balance the load and repeat the spin cycle.
• Rearrange load to
allow proper
spinning.
Loading ...
Loading ...
Loading ...