Loading ...
Loading ...
Loading ...
27
Cleaning and Maintenance
This oven features an automatic pyrolytic self-cleaning cycle. During this cycle, the oven reaches elevated temperatures in order to
burn-off soil and deposits. An integral smoke eliminator helps reduce odors associated with the soil burn-off. A powder ash residue is
left in the bottom of the oven after completion of the self-clean cycle. The door latch is automatically activated after selecting the self-
clean setting. The latch ensures that the door cannot be opened while the oven interior is at clean temperatures.
Before starting the Self-Clean cycle:
1. Remove the oven racks, and any other items/utensils from the oven. The high heat generated during the cleaning cycle can
discolor, warp, and damage these items. DO NOT use foil or liners in the oven. During the self-clean cycle, foil can burn or melt and
damage the oven surface.
2. Wipe off any large spills from the oven bottom and sides. NEVER use oven cleaners inside a self-cleaning oven or on raised
portions of the door.
3. Some areas of the oven must be cleaned by hand before the cycle begins. Soils in these areas will be baked on and very difficult to
clean if not removed first. Clean the door up to the gasket, the door frame, and up to 2 inches inside the frame with detergent and
hot water. Rinse thoroughly and dry.
CAUTION
WARNING
BURN OR ELECTRICAL SHOCK HAZARD
Make sure all controls are OFF and oven is COOL before
cleaning. Failure to do so can result in burns or electrical
shock.
DO NOT touch the exterior portions of the oven after self-
cleaning cycle has begun, since some parts become extremely
hot to the touch! During the first few times the self-cleaning
feature is used, there may be some odor and smoking from the
curing of the binder in the high-density insulation used in the
oven. When the insulation is thoroughly cured, this odor will
disappear. During subsequent self-cleaning cycles, you may sense
an odor characteristic of high temperatures. Keep the kitchen
well-vented during the self-cleaning cycle.
To start the Self-Clean cycle:
1. Close the door completely.
2. Turn the oven selector knob clockwise to the “SELF CLEAN” mode.
3. Turn the temperature control knob past the clean setting until the knob stops. At this time, the clean indicator light will come on.
Within 30 seconds the automatic door latch engages and the oven indicator light comes on. The oven indicator light will remain on
until the oven reaches the self-clean temperature and will then cycle on and off during the self-clean cycle. When the oven reaches
the elevated temperature needed for self-clean, the door lock indicator light comes on.
4. The door lock indicator light will remain on until the self-clean is completed or interrupted and the oven temperature drops to a
safe temperature. A complete cycle is approximately 3-1/2 hours with an additional 30 minutes needed for the oven to cool down
enough for the door latch to disengage.
Note: A fan noise will be heard during the self-clean cycle and will continue to run for the 3-1/2 hour duration of the self-clean cycle.
Note: On griddle model ranges, the griddle/simmer plate will not function during the self-clean cycle.
5. When the cycle is completed, turn both the oven selector and temperature control knob to the “OFF” position. When the oven has
completely cooled, open door and remove any ash from the oven surfaces with a damp cloth.
To stop the Self-Clean cycle:
To cancel or interrupt the self-cleaning cycle, turn both the temperature control knob and the oven function selector knob to “OFF”.
When the oven temperature drops to a safe temperature, the automatic door latch will release and the oven door can be opened.
When the oven has completely cooled, remove any ash from the oven surfaces with a damp sponge or cloth.
Self-Clean Cycle
NOTICE
When using the self-clean cycle to clean the oven, the
griddle will not function and cannot be used.
Loading ...
Loading ...
Loading ...