Loading ...
Loading ...
Loading ...
15
1. Align the bulb leads with the small indentations located on
the border of the lamp location on hood (see inset above),
then install the bulbs by placing the bulb leads into their
grooves in the socket.
!
CAUTION: Most GU10 LED replacement bulbs
commonly found in the market are not designed for
use in a cooking environment and might not perform
as advertised. Their usage with this product is not
recommended.
INSTALL THE LIGHT BULBS
This range hood requires two shielded Halogen Bulbs (120 V, 50 W max., MR16 or PAR16 with GU10 base).
NOTE: The Suction Cup Tool (included with hood) can be used to install and remove light bulbs. Press suction cup
tool on bulb and rotate counterclockwise to remove bulb or clockwise to install bulb.
SUCTION
CUP TOOL
BULB
LEADS
BULB LEAD
GROOVES
(IN SOCKET)
WARNING: Do not touch lamps during or soon after
operation. Burns may occur. In order to prevent
the risk of personal injury, only install shielded
halogen lamps. Also, never install a cool beam, a
dichroic lamp, a lamp not suitable for use in recessed
luminaires or identifi ed for use in enclosed fi xtures.
Ducted Installation Only:
Re-install grease fi lters removed in step 1 on page 7, under
“Prepare the Hood”.
INSTALL THE FILTERS
“Non-ducted Filters” available by calling
1-844-553-6667
INDENT
2. Gently push upwards and turn clockwise until secured.
Non-ducted Installation Only:
Purchase two non-ducted fi lters (see part number in Service
parts list). Attach the non-ducted fi lters following instructions
packed with the non-ducted fi lters.
Loading ...
Loading ...
Loading ...