Loading ...
Loading ...
Loading ...
7
REVERSING THE DOOR
Carefully tilt the freezer back to access the
bottom hinge assembly.
Note: Do not tilt >45°.
Using a phillips head screwdriver, remove the
screws holding the hinge in place. Unscrew
the adjustable foot from the opposite side.
Relocate the bottom hinge to the opposite
side and secure in place using the same
screws from step 6.
Note: Do not tighten screws completely until
after the door has been correctly placed and
the seal checked. Screw the adjustable foot
into the opposite side.
Replace the screws that previously held the
hinge in place from step 1. Remove the cover
from the opposite side and place over screws.
Remove the two screws now exposed and
install the top hinge.
Note: Do not tighten the hinge screws
completely until the door has been aligned
and seals aligned.
6.
7.
9.
8.
step 6
adjustable footbottom hinge assembly
step 7
bottom hinge assembly
adjustable foot
step 8
top cover
replace screws here
step 9
install hinge here
cover installed here
10.
11.
To reverse the door handle, remove the two screw caps from the side of the handle.
Unscrew both screws and remove handle. Remove the screw caps from the
opposite side of the door and replace them to this side. Screw handle onto new side
and replace original screw caps on handle.
Place the door on the top and bottom hinges, align making sure the door gasket
seals correctly. Once aligned, tighten the hinge screws.
Replace the hinge cover.
12.
Loading ...
Loading ...
Loading ...