Loading ...
Loading ...
Loading ...
Fill the detergent dispenser with detergent before you
set a new washing program.
Select and start a washing program with delay
start
1. Press the on/off button.
2. Set a washing program.
3. Press the delay start button until the indicator light
related to 3 or 6 hours comes on.
4. Close the door.
– The countdown starts.
– When the countdown is completed, the washing
program starts automatically.
With the delay start function set, the 'Washing'
indicator light goes off. Once the countdown of
the delay start has ended, the washing program will
start automatically and the 'Washing' indicator light
comes on.
If you open the door during the countdown, this
will interrupt the countdown. When you close the
door again, the countdown continues from the point of
interruption.
Cancelling delay start
1. Press and hold at the same time the two program
buttons positioned above the word 'Cancel', until
all the program lights come on
– When you cancel delay start, you also cancel
the washing program.
2. Set a new washing program.
End of the washing program
• The 'Finished' indicator light comes on.
• The 'Washing' indicator light goes off.
1. Switch off the appliance.
2. Open the door.
– For better drying results, keep the door ajar for
some minutes before you remove the dishes.
Let the dishes cool down before you remove them from
the appliance. Hot dishes are easily damaged.
Removing the load
• First remove items from the lower basket, then from
the upper basket.
• There can be water on the sides and door of the
appliance. Stainless steel becomes cool more quick-
ly than the dishes.
Care and cleaning
Warning! Switch the appliance off before you
clean it.
Cleaning the filters
Important! Do not use the appliance without the filters.
Make sure that the installation of the filters is correct.
Incorrect installation will cause unsatisfactory washing
results and damage to the appliance.
1 2
Fully clean the filters A, B
and C below running wa-
ter.
9
Loading ...
Loading ...
Loading ...