Loading ...
Loading ...
Loading ...
3
Fill the detergent dis-
penser (A) with deter-
gent.
4
If you use a washing pro-
gram with prewash
phase, put more deter-
gent in the prewash de-
tergent compartment (B).
5
6
Different brands of detergent dissolve in different
times. Some detergent tablets do not have the
best cleaning results during short washing programs.
Use long washing programs when you use detergent
tablets to fully remove the detergent.
Use of combi detergent tablets
These products are detergents with a combined clean-
ing and rinsing functions. They can contain also other
cleaning agents.
Refer to the instructions from the manufacturer for the
use of these products.
With tablets that contain rinse aid:
• set the lowest position for the rinse aid dosage,
• do not put rinse aid in the rinse aid dispenser. In this
condition rinse aid indicator light is always on when
you switch on the appliance.
.
Do these steps if the drying results are not satis-
factory:
1. Fill the rinse aid dispenser with rinse aid.
2. Set the rinse aid dosage to position 2.
If you go back to use normal detergents again, fill
the rinse aid dispenser and adjust the rinse aid
dosage.
Select and start a washing program
Set the washing program with the door ajar. The
washing program only starts after you close the
door. Until then it is possible to modify the settings.
1. Press the on/off button.
2. Make sure that the appliance is in setting mode.
3. Press one of the program buttons. Refer to the
'Washing programs' chart for program details.
– The indicator light of the selected program stays
on. All other program indicator lights go off.
4. Close the door. The washing program starts auto-
matically.
When the washing program operates, you cannot
change the program. Cancel the washing pro-
gram. Refer to 'Cancelling a washing program'.
Warning! Only interrupt or cancel a washing
program if necessary.
Attention! Open the door carefully. Hot steam and
water can escape.
Interrupting a washing program
Open the door.
• The program stops.
Close the door.
• The program continues from the point of interruption.
Cancelling a washing program
1. Press and hold at the same time the two program
buttons positioned above the word 'Cancel', until
all the program lights come on.
2. Release the two buttons, the washing program has
been cancelled.
At this point, you can follow these steps:
1. Switch off the appliance.
2. set a new washing program.
8
Loading ...
Loading ...
Loading ...