Loading ...
Loading ...
Loading ...
do not attempt to make repairs at the component level or to make
modifications to any printed wiring board. Improper repairs can create
a safety hazard.
> Verify that the AC power supply branch circuit that provides power
to the rack is not overloaded. This will reduce the risk of personal
injury, fire, or damage to the equipment. The total rack load should not
exceed 80 percent of the branch circuit rating. Consult the electrical
authority having jurisdiction over your facility wiring and installation
requirements.
> The covers should remain locked during normal operation.
> The server should be installed in a controlled access location where
only qualified personnel have access to the server.
> Upon completion of any service or repairs to the product, have your
authorized service provider perform any safety checks required by the
repair procedure or by local codes to determine that the product is in
proper operating condition.
> Power down the equipment and disconnect all AC power cords and
cable before removing any access covers.
> Do not replace components while power is applied to the product.
First, shut down the product and disconnect all AC power cords.
> Allow the product to cool before removing covers and touching internal
components.
> Move products with casters carefully. Avoid quick stops and uneven
surfaces.
> Do not block the opening used for ventilation, since these ensure
reliable operation of product and protect it from overheating. And
opening should be kept free of dust and debris.
> Do not insert or pour anything into the opening used for ventilation.
> Allow sufficient air circulation around and Prevent direct exposure to
radiant heat sources.
> Before cleaning, ensure unplug the product from the wall outlet.
> Do not use liquid cleaners or aerosol cleaner, use a damp cloth for
cleaning.
SAFETY INFORMATION
Loading ...
Loading ...
Loading ...