Loading ...
Loading ...
Loading ...
Reference At a glanceControlsDriving tipsMobility
19
> Settings for the display in the instrument
cluster:
> 12h/24h format of the clock, refer to
page 64
> Date format, refer to page 64
> Units of measure, refer to page 64
> Light settings:
> Pathway lighting, refer to page 79
> Daytime running lights, refer to page 80
> High-beam assistant, refer to page 81
> Automatic climate control
*
: AUTO pro-
gram, cooling function and automatic recir-
culated-air control activated/deactivated,
temperature, air volume and distribution,
refer to page 87 ff
> Entertainment:
> Speed-dependent volume control, refer
to separate Owner's Manual
Central locking system
The concept
The central locking system functions when the
driver's door is closed.
The system simultaneously engages and
releases the locks on the following:
> Doors
> Trunk lid/tailgate
> Fuel filler flap
Operating from outside
> Via the remote control
> Via the door lock
*
> In cars with Comfort Access
*
, via the han-
dles on the driver's and front passenger
doors
In addition, if the remote control is used, the
interior lamps and the door's courtesy lamps
*
are also switched on or off. The alarm system
*
is also armed or disarmed.
For further details of the alarm system,
refer to
page 25.
Operating from inside
By means of the button for central locking, refer
to page 22.
In the event of a sufficiently severe accident, the
central locking system unlocks automatically. In
addition, the hazard warning flashers and inte-
rior lamps come on.
Opening and closing:
Using the remote control
Persons or animals in a parked vehicle
could lock the doors from the inside. You
should therefore take the remote control with
you when you leave the vehicle so that the latter
can be opened from outside.<
Unlocking
Press the button.
The interior lamps, the courtesy lamps
*
and the
welcome lamps come on.
Setting unlocking characteristics
You can set whether only the driver's door or
the entire vehicle is to be unlocked when the
button is pressed for the first time.
For operating principle, refer to page 64.
1. Switch on the ignition, refer to page 46.
2. Lightly push button 1 in the turn indicator
lever up or down repeatedly until the sym-
bol appears in the display accompanied by
the word "SET".
3. Press button 2.
Online Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AGOnline Edition for Part no. 01 41 2 602 994 - © 08/09 BMW AG
Loading ...
Loading ...
Loading ...