Loading ...
Loading ...
Loading ...
34 35
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSES WHAT TO DO
Total brewing
time on LCD
screen changes
mid-cycle or is
different each time
The total brewing time
displayed at the start of
the cycle is an estimate
only and may change
mid-cycle or vary each
time depending on the
starting temperature
of the water in the
water tank.
Brewing cycle
finishes before
the ready signal
If using the gold tone
filter, this is normal.
The total brewing time
displayed on the LCD
screen is calculated using
paper filters as coffee
passes through paper
filters slower.
‘CLEAN COFFEE
CHUTE’ on LCD
screen
Grinding burrs and
coffee grinds chute
need to be cleaned. We
recommend doing this
immediately to avoid
clogging and overflowing
of the coffee basket.
• Thoroughly clean the coffee
basket and gold tone filter
to ensure they are clear and
unclogged of any coffee grinds.
• Check the bean hopper for any
foreign body.
• Refer to ‘Cleaning the Grinding
Burrs and Coffee Grinds Chute’,
page 25.
Machine beeps and
displays ‘1’ on the
LCD screen
There is an issue with the
coffee grinds chute disc.
Remove the plug from the power
outlet. Wait 10 seconds then
reinsert. Check the coffee grinds
chute disc for any build-up of
coffee grinds. This is the stainless
steel disc that is visible when the
swing-out door is opened. A
build-up of grinds on this disc
can affect the performance of the
machine. Wipe the disc clean then
dry thoroughly. If the problem
persists, call Breville Consumer
Service.
Machine beeps
20 times in fast
succession and ‘2’
is displayed on the
LCD screen
Remove the plug from the power
outlet. Wait 10 seconds then
reinsert. If the problem persists, call
Breville Consumer Service.
Loading ...
Loading ...
Loading ...