Loading ...
Loading ...
Loading ...
9
Special
features of
your oven
control
Your new touch pad control has additional features
that you may choose to use.
They remain in the control’s memory until the
steps are repeated. When the display shows
your choice, press the START pad. The special
features will remain in memory after a power
failure, except for the Sabbath feature, which will
have to be reset.
The special feature modes can only be activated
while the display is showing the time of day clock.
The following are the features and how you
may activate them.
Using
the timer
1 Press the TIMER ON/OFF pad.
2 Press the number pads to set the time. For
example, to enter 2 hours and 45 minutes,
touch 2, 4 and 5 in that order.
If you make a mistake, press the TIMER ON/OFF
pad and begin again.
3 Press the START pad.
After pressing the START pad, “SET”
disappears; this tells you the time is counting
down, although the display does not change
until one minute has passed.
4 When time is up, the oven control signals
until you press the TIMER ON/OFF pad.
Display then shows the time of day.
NOTE: The minute timer is independent of all the
other functions and it does not control the oven.
The CLEAR/OFF pad does not affect the timer.
Tones at
the end of a
timed cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the CLEAR/OFF pad is pressed. This continuous
6 second beep may be canceled. To cancel the
6 second beep:
1 Press the BAKE and BROIL HI/LO pads
(on double oven models use the upper oven
controls) at the same time for 3 seconds until
the display shows “SF.”
2 Press the TIMER ON/OFF pad. The display
shows “CON BEEP” (continuous beep). Press
the TIMER ON/OFF pad again. The display
shows “BEEP.” (This cancels the one beep
every 6 seconds.)
3 Press the START pad.
NOTE: On double oven models this cancels the end of
cycle tone for both ovens.
Loading ...
Loading ...
Loading ...