Loading ...
Loading ...
Loading ...
18
English
►Replacing the system outer foil
1. Press the system outer foil release buttons
and pull down the system outer foil.
2. Insert the system outer foil until it clicks.
• Always attach the system outer foil in
proper direction.
• Always insert the system outer foil to the
foil frame when attaching to the shaver.
►Replacing the inner blades
1. Remove the inner blades one at a time.
• Do not touch the edges (metal parts) of the inner
blades to prevent injury to your hand.
2. Insert the inner blades one at a time until they click.
►Replacement parts
Replacement parts are available at your dealer or Service Center.
Replacement parts for
ES‑RT97
System outer foil and inner
blades
WES9013
System outer foil WES9097
Inner blades WES9068
Special Detergent for Shaver Cleaning & Charging
System
WES4L03
Cleaning the self-cleaning recharger
Beard trimmings may become attached to the cleaning tray of the
self‑cleaning recharger. Follow the steps below to remove them. We
recommend doing this each time you change the cleaning liquid.
1. Be sure to remove the cleaning liquid unit
and the appliance plug from the self‑
cleaning recharger.
• Be careful not to spill the cleaning liquid.
• Some cleaning liquid components and
skin oil may separate and adhere to the
cleaning liquid unit and cleaning liquid
filter. This does not indicate a problem.
2. Pour water as illustrated while
tilting the cleaning liquid unit
and shaking it gently.
• You can clean with the
cleaning liquid filter removed.
• After washing, be sure to
attach the cleaning liquid filter.
3.
Gently wipe off any beard trimmings attached
to the inside of the cleaning tray with a cloth
or tissue paper dampened with water.
• Clean the corners and uneven parts of the
cleaning tray with a cotton swab
dampened with water.
Loading ...
Loading ...
Loading ...